Z8F1622VS020SG Zilog, Z8F1622VS020SG Datasheet - Page 4

• Manufacturer Part Number: Z8F1622VS020SG
• Description: IC ENCORE MCU FLASH 16K 68PLCC
• Manufacturer: Zilog
• Series: Encore!® XP®r

Specifications of Z8F1622VS020SG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 46
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 68-LCC (J-Lead)
• Processor Series: Z8F162x
• Core: eZ8
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 46
• Number Of Timers: 4
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• On-chip Adc: 10 bit, 12 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4243; Z8F1622VS020SG

Table 2. Z8 Encore! XP F64XX Series Errata Date Coded Prior to 0334 (Continued)
UP006010-0508
Sl
No. Summary
11
12
13
RESET pin is not fil-
tered.
Timers cannot be
cascaded.
ADC generates
extra interrupts.
Description
The RESET pin does not properly filter the input signal. The device may enter
Reset when the RESET pin is asserted for less than the specified four system
clock cycles (from NORMAL mode).
Workaround
Add external filtering to the printed-circuit board.
Setting the CSC bit (bit 4) of the Timer Control 0 Registers does not cascade
the timers as indicated in the specification.
Workaround
Timers can be cascaded using the Timer-Out and Timer-In functions through
the general-purpose I/O pins.
The ADC continues to generate interrupts in CONTINUOUS mode after the
first interrupt before the results of the next conversion is complete.
Workaround
Do not use CONTINUOUS mode. Use SINGLE-SHOT mode instead.
Errata for Z8 Encore! XP
®
F64XX Series
Page 4 of 5