AT32UC3A1512-AUT Atmel, AT32UC3A1512-AUT Datasheet - Page 502

• Manufacturer Part Number: AT32UC3A1512-AUT
• Description: IC MCU AVR32 512KB FLASH 100TQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3A1512-AUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: Ethernet, I²C, SPI, SSC, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: 2-Wire/RS-485/SPI/USART
• Maximum Clock Frequency: 66 MHz
• Number Of Programmable I/os: 69
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL, KSK-EVK1100-PL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATEXTWIFI, ATEVK1100, ATEVK1105
• Minimum Operating Temperature: - 40 C
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMR770-1008 - ISP 4PORT ATMEL AVR32 MCU SPIATSTK600-TQFP100 - STK600 SOCKET/ADAPTER 100-TQFPATEVK1100 - KIT DEV/EVAL FOR AVR32 AT32UC3A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

30.6
30.6.1
30.6.2
30.6.3
32058J–AVR32–04/11
Product Dependencies
I/O Lines
Power Management
Interrupts
The USB_VBOF and USB_ID pins are multiplexed with GPIO lines and may also be multiplexed
with lines of other peripherals. In order to use them with the USB, the programmer must first pro-
gram the GPIO controller to assign them to their USB peripheral functions. Moreover, if USB_ID
is used, the GPIO controller must be configured to enable the internal pull-up resistor of its pin.
If USB_VBOF or USB_ID is not used by the application, the corresponding pin can be used for
other purposes by the GPIO controller or by other peripherals.
The 48 MHz USB clock is generated by a dedicated generic clock from the power manager.
Before using the USB, the programmer must ensure that the USB generic clock (USB GCLK) is
enabled at 48 MHz in the power manager.
The USB interface has an interrupt line connected to the interrupt controller. In order to handle
USB interrupts, the interrupt controller must be programmed first.
AT32UC3A
502