PIC18F6680-E/L Microchip Technology, PIC18F6680-E/L Datasheet - Page 31

• Manufacturer Part Number: PIC18F6680-E/L
• Description: IC PIC MCU FLASH 32KX16 68PLCC
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F6680-E/L

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.25K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 68-PLCC
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3328 B
• Interface Type: I2C, SPI, AUSART, CAN
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• For Use With: AC164308 - MODULE SKT FOR PM3 68PLCCXLT68L1 - SOCKET TRANSITION ICE 68PLCCAC174007 - MODULE SKT PROMATEII 68PLCC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.4
To allow portability of code, a PIC18FXX80/XX85
programmer is required to read the Configuration Word
locations from the HEX file. If Configuration Word infor-
mation is not present in the HEX file, then a simple
warning message should be issued. Similarly, while
saving a HEX file, all Configuration Word information
must be included. An option to not include the Configu-
ration Word information may be provided. When
embedding Configuration Word information in the HEX
file, it should start at address 300000h.
Microchip Technology Inc. feels strongly that this
feature is important for the benefit of the end customer.
 2010 Microchip Technology Inc.
Embedding Configuration Word
Information in the HEX File
5.5
The checksum is calculated by summing the following:
• The contents of all code memory locations
• The Configuration Word, appropriately masked
• ID locations
The Least Significant 16 bits of this sum are the
checksum.
Table 5-4 (pages 32 through 35) describes how to
calculate the checksum for each device.
Note:
PIC18FXX80/XX85
Checksum Computation
The checksum calculation differs depend-
ing on the code-protect setting. Since the
code memory locations read out differently
depending on the code-protect setting, the
table describes how to manipulate the
actual code memory values to simulate
the values that would be read from a
protected device. When calculating a
checksum by reading a device, the entire
code memory can simply be read and
summed. The Configuration Word and ID
locations can always be read.
DS39606E-page 31