PIC17C43-33/L Microchip Technology, PIC17C43-33/L Datasheet - Page 27

• Manufacturer Part Number: PIC17C43-33/L
• Description: IC MCU OTP 4KX16 PWM 44PLCC
• Manufacturer: Microchip Technology
• Series: PIC® 17Cr

Specifications of PIC17C43-33/L

• Core Size: 8-Bit
• Program Memory Size: 8KB (4K x 16)
• Oscillator Type: External
• Core Processor: PIC
• Speed: 33MHz
• Connectivity: UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Type: OTP
• Ram Size: 454 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 6 V
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 44-PLCC
• Controller Family/series: PIC17
• No. Of I/o's: 33
• Ram Memory Size: 232Byte
• Cpu Speed: 33MHz
• No. Of Timers: 4
• No. Of Pwm: RoHS Compliant
• Processor Series: PIC17C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 454 B
• Interface Type: SCI, USART
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 4
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164317 - MODULE SKT MPLAB PM3 44PLCCDVA17XL441 - DEVICE ADAPTER FOR PIC17C42A309-1007 - ADAPTER 44-PLCC ZIF TO 40-DIPAC174002 - MODULE SKT PROMATEII 44PLCC
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

5.9
During an interrupt, only the returned PC value is saved
on the stack. Typically, users may wish to save key reg-
isters during an interrupt; e.g. WREG, ALUSTA and the
BSR registers. This requires implementation in soft-
ware.
EXAMPLE 5-1:
;
; The addresses that are used to store the CPUSTA and WREG values
; must be in the data memory address range of 18h - 1Fh. Up to
; 8 locations can be saved and restored using
; the MOVFP instruction. This instruction neither affects the status
; bits, nor corrupts the WREG register.
;
;
PUSH
ISR
POP
1996 Microchip Technology Inc.
Context Saving During Interrupts
MOVFP
MOVFP
MOVFP
:
:
MOVFP
MOVFP
MOVFP
RETFIE
WREG, TEMP_W
ALUSTA, TEMP_STATUS
BSR, TEMP_BSR
TEMP_W, WREG
TEMP_STATUS, ALUSTA
TEMP_BSR, BSR
SAVING STATUS AND WREG IN RAM
; Save WREG
; Save ALUSTA
; Save BSR
; This is the interrupt service routine
; Restore WREG
; Restore ALUSTA
; Restore BSR
; Return from Interrupts enabled
Example 5-1 shows the saving and restoring of infor-
mation for an interrupt service routine. The PUSH and
POP routines could either be in each interrupt service
routine or could be subroutines that were called.
Depending on the application, other registers may also
need to be saved, such as PCLATH.
PIC17C4X
DS30412C-page 27