PIC18F4580T-I/PT Microchip Technology, PIC18F4580T-I/PT Datasheet - Page 5

• Manufacturer Part Number: PIC18F4580T-I/PT
• Description: IC PIC MCU FLASH 16KX16 44TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4580T-I/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

9. Module: MSSP
10. Module: ECAN™ Technology
© 2007 Microchip Technology Inc.
In SPI mode, the SDO output may change after the
inactive clock edge of the bit ‘0’ output. This may
affect some SPI components that read data over
300 ns after the inactive edge of SCK.
Work around
None
Date Codes that pertain to this issue:
All engineering and production devices.
In Listen Only mode, the ECAN module may
persistently set the IRXIF and RXB0IF interrupt
flags and the RXFUL status flag, after receiving
129 or more consecutive error frames. In this case,
the flags can be cleared, but then will become set
again immediately and continuously without
receiving a bus message.
Work around
Place the ECAN module in Configuration mode
before receiving 129 consecutive error frames,
and then place it back into Listen Only mode.
Date Codes that pertain to this issue:
All engineering and production devices.
PIC18F2480/2580/4480/4580
11. Module: 10-Bit Analog-to-Digital
When the AD clock source is selected as 2 T
RC (when ADCS2:ADCS0 = 000 or x11), in
extremely rare cases, the E
Error) and E
exceed the data sheet specification at codes 511
and 512 only.
Work around
Select the AD clock source as 4 T
16 T
2 T
Date Codes that pertain to this issue:
All engineering and production devices.
OSC
OSC
or RC.
, 32 T
Converter
DL
OSC
(Differential Linearity Error) may
or 64 T
OSC
IL
and avoid selecting
(Integral Linearity
DS80219E-page 5
OSC
, 8 T
OSC
OSC
or
,