ATMEGA1284-MU Atmel, ATMEGA1284-MU Datasheet - Page 55

• Manufacturer Part Number: ATMEGA1284-MU
• Description: IC MCU AVR 128K FLASH 44QFN
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA1284-MU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 128KB (64K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-VQFN Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10.2
10.2.1
8272A–AVR–01/10
Internal Voltage Reference
Voltage Reference Enable Signals and Start-up Time
ATmega164A/164PA/324A/324PA/644A/644PA/1284/1284P features an internal bandgap ref-
erence. This reference is used for Brown-out Detection, and it can be used as an input to the
Analog Comparator or the ADC.
The voltage reference has a start-up time that may influence the way it should be used. The
start-up time is given in
reference is not always turned on. The reference is on during the following situations:
1. When the BOD is enabled (by programming the BODLEVEL [2:0] Fuse).
2. When the bandgap reference is connected to the Analog Comparator (by setting the
3. When the ADC is enabled.
Thus, when the BOD is not enabled, after setting the ACBG bit or enabling the ADC, the user
must always allow the reference to start up before the output from the Analog Comparator or
ADC is used. To reduce power consumption in Power-down mode, the user can avoid the three
conditions above to ensure that the reference is turned off before entering Power-down mode.
164A/164PA/324A/324PA/644A/644PA/1284/1284P
ACBG bit in ACSR).
”System and Reset Characteristics” on page
335. To save power, the
55