PIC16F1936-I/ML Microchip Technology, PIC16F1936-I/ML Datasheet - Page 7

• Manufacturer Part Number: PIC16F1936-I/ML
• Description: IC PIC MCU FLASH 512KX14 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1936-I/ML

• Program Memory Type: FLASH
• Program Memory Size: 14KB (8K x 14)
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 25
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: EUSART/MI2C/SPI
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 5
• Operating Supply Voltage: 2.3 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 11-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

8. Module: Timer1
8.1 Timer1 Gate Toggle mode with Timer0 as
8.2 Timer1 Gate Toggle mode
 2010 Microchip Technology Inc.
Gate Source
Timer1 Gate Toggle mode provides unexpected
results when Timer0 overflow is selected as the
Timer1 gate source. We do not recommend using
Timer0 overflow as the Timer1 gate source while in
Timer1 Gate Toggle mode or when Toggle mode is
used in conjunction with Timer1 Gate Single-Pulse
mode.
Work around
None.
Affected Silicon Revisions
When Timer1 Gate Toggle mode is enabled, it is
possible to measure the full-cycle length of a
Timer1 gate signal. To perform this function, the
Timer1 gate source is routed through a flip-flop
that changes state on every incrementing edge of
the gate signal. Timer1 Gate Toggle mode is
enabled by setting the T1GTM bit of the T1GCON
register. When working properly, clearing either
the T1GTM bit or the TMR1ON bit would also clear
the output value of this flip-flop, and hold it clear.
This is done in order to control which edge is being
measured. The issue that exists is that clearing the
TMR1ON bit does not clear the output value of the
flip-flop and hold it clear.
Work around
Clear the T1GTM bit in the T1GCON register to
clear and hold clear the output value of the flip-
flop.
Affected Silicon Revisions
A2
A2
X
X
PIC16F1934/1936/1937 and PIC16LF1934/1936/1937
A3
A3
X
X
A5
A5
X
X
A6
A6
X
X
9. Module: LDO
9.1 Minimum V
Note:
The
PIC16F193X devices is 3.5 volts for temperatures
above 85°C.
Work around
None.
Affected Silicon Revisions
A2
X
minimum
This
PIC16F193X devices operating in the
Extended
PIC16LF193X devices are not affected.
A3
X
DD
A5
issue
X
above 85°C
voltage
temperature
A6
X
only
required
applies
DS80479F-page 7
range.
to
for
The
the
the