PIC16F1826-I/ML Microchip Technology, PIC16F1826-I/ML Datasheet - Page 94

• Manufacturer Part Number: PIC16F1826-I/ML
• Description: IC PIC MCU FLASH 2K 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1826-I/ML

• Core Size: 8-Bit
• Program Memory Size: 3.5KB (2K x 14)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC16F
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 256Byte
• Cpu Speed: 32MHz
• No. Of Timers: 3
• Interface: EUSART, I2C, SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC16F/LF1826/27
8.5.4
The PIE3 register contains the interrupt enable bits, as
shown in Register 8-4.
REGISTER 8-4:
DS41391C-page 94
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Note 1:
U-0
—
This register is only available on PIC16F/LF1827.
PIE3 REGISTER
Unimplemented: Read as ‘0’
CCP4IE: CCP4 Interrupt Enable bit
1 = Enables the CCP4 interrupt
0 = Disables the CCP4 interrupt
CCP3IE: CCP3 Interrupt Enable bit
1 = Enables the CCP3 interrupt
0 = Disables the CCP3 interrupt
TMR6IE: TMR6 to PR6 Match Interrupt Enable bit
1 = Enables the TMR6 to PR6 Match interrupt
0 = Disables the TMR6 to PR6 Match interrupt
Unimplemented: Read as ‘0’
TMR4IE: TMR4 to PR4 Match Interrupt Enable bit
1 = Enables the TMR4 to PR4 Match interrupt
0 = Disables the TMR4 to PR4 Match interrupt
Unimplemented: Read as ‘0’
U-0
—
PIE3: PERIPHERAL INTERRUPT ENABLE REGISTER 3
(1)
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
R/W-0/0
CCP4IE
R/W-0/0
CCP3IE
Preliminary
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
TMR6IE
R/W-0/0
Note 1: The PIE3 register is available only on the
2: Bit PEIE of the INTCON register must be
PIC16F/LF1827 device.
set to enable any peripheral interrupt.
U-0
—
 2010 Microchip Technology Inc.
(1)
R/W-0/0
TMR4IE
U-0
—
bit 0