ATTINY9-TSHR Atmel, ATTINY9-TSHR Datasheet - Page 161

• Manufacturer Part Number: ATTINY9-TSHR
• Description: IC MCU AVR 1KB FLASH SOT-23-6
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY9-TSHR

• Package / Case: SOT-23-6
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 12MHz
• Number Of I /o: 4
• Core Processor: AVR
• Program Memory Type: FLASH
• Ram Size: 32 x 8
• Program Memory Size: 1KB (1K x 8)
• Oscillator Type: Internal
• Peripherals: POR, PWM, WDT
• Core Size: 8-Bit
• Controller Family/series: ATtiny
• No. Of I/o's: 4
• Ram Memory Size: 32Byte
• Cpu Speed: 12MHz
• No. Of Timers: 1
• Rohs Compliant: Yes
• Processor Series: ATTINY9x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 32 B
• Interface Type: ISP
• Maximum Clock Frequency: 12 MHz
• Number Of Programmable I/os: 4
• Number Of Timers: 1
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

22.2.2
22.2.3
22.3
22.3.1
22.3.2
8127D–AVR–02/10
ATtiny9
Rev. D
Rev. A – C
Rev. E
Rev. D
•
•
1. ESD HBM (ESD STM 5.1) level ±1000V
2. Programming Lock Bits
Not sampled.
•
1. Programming Lock Bits
•
•
1. ESD HBM (ESD STM 5.1) level ±1000V
2. Programming Lock Bits
ESD HBM (ESD STM 5.1) level ±1000V
Programming Lock Bits
Programming Lock Bits
ESD HBM (ESD STM 5.1) level ±1000V
Programming Lock Bits
The device meets ESD HBM (ESD STM 5.1) level ±1000V.
Problem Fix / Workaround
Always use proper ESD protection measures (Class 1C) when handling integrated circuits
before and during assembly.
Programming Lock Bits to a lock mode equal or lower than the current causes one word of
Flash to be corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
Programming Lock Bits to a lock mode equal or lower than the current causes one word of
Flash to be corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
The device meets ESD HBM (ESD STM 5.1) level ±1000V.
Problem Fix / Workaround
Always use proper ESD protection measures (Class 1C) when handling integrated circuits
before and during assembly.
Programming Lock Bits to a lock mode equal or lower than the current causes one word of
Flash to be corrupted. The location of the corruption is random.
Problem Fix / Workaround
When programming Lock Bits, make sure lock mode is not set to present, or lower levels.
ATtiny4/5/9/10
161