PIC18F4480-I/P Microchip Technology, PIC18F4480-I/P Datasheet - Page 25

• Manufacturer Part Number: PIC18F4480-I/P
• Description: IC PIC MCU FLASH 8KX16 40DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4480-I/P

• Program Memory Type: FLASH
• Program Memory Size: 16KB (8K x 16)
• Package / Case: 40-DIP (0.600", 15.24mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 36
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: SPI/I2C/MSSP/EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 4
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM163011
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 11-ch x 10-bit
• Package: 40PDIP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DVA18XP400 - DEVICE ADAPTER 18F4220 PDIP 40LD444-1001 - DEMO BOARD FOR PICMICRO MCUACICE0206 - ADAPTER MPLABICE 40P 600 MIL
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

2.0
2.1
Getting started with the PIC18F2480/2580/4480/4580
family of 8-bit microcontrollers requires attention to a
minimal set of device pin connections before
proceeding with development.
The following pins must always be connected:
• All V
• All AV
• MCLR pin
These pins must also be connected if they are being
used in the end application:
• PGC/PGD pins used for In-Circuit Serial
• OSCI and OSCO pins when an external oscillator
Additionally, the following pins may be required:
• V
The minimum mandatory connections are shown in
Figure 2-1.
© 2009 Microchip Technology Inc.
(see Section 2.2 “Power Supply Pins”)
not the analog device features are used
(see Section 2.2 “Power Supply Pins”)
(see Section 2.3 “Master Clear (MCLR) Pin”)
Programming™ (ICSP™) and debugging purposes
(see Section 2.4 “ICSP Pins”)
source is used
(see Section 2.5 “External Oscillator Pins”)
reference for analog modules is implemented
Note:
REF
DD
+/V
DD
GUIDELINES FOR GETTING
STARTED WITH PIC18F
MICROCONTROLLERS
Basic Connection Requirements
and V
REF
and AV
The AV
connected, regardless of whether any of
the analog modules are being used.
- pins are used when external voltage
SS
SS
pins
DD
pins, regardless of whether or
and AV
SS
pins must always be
PIC18F2480/2580/4480/4580
FIGURE 2-1:
V
Key (all values are recommendations):
C1 through C6: 0.1 µF, 20V ceramic
R1: 10 kΩ
R2: 100Ω to 470Ω
Note 1:
DD
C6
R1
C1
(1)
R2
The example shown is for a PIC18F device
with five V
Other devices may have more or less pairs;
adjust the number of decoupling capacitors
appropriately.
MCLR
V
V
SS
DD
C5
DD
PIC18FXXXX
RECOMMENDED
MINIMUM CONNECTIONS
(1)
/V
SS
C2
and AV
(1)
C4
DD
DS39637D-page 25
(1)
/AV
V
V
DD
SS
SS
pairs.
C3
(1)