PIC12F675-E/SN Microchip Technology, PIC12F675-E/SN Datasheet - Page 19

• Manufacturer Part Number: PIC12F675-E/SN
• Description: IC MCU CMOS 1K FLASH W/AD 8-SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 12Fr

Specifications of PIC12F675-E/SN

• Program Memory Type: FLASH
• Program Memory Size: 1.75KB (1K x 14)
• Package / Case: 8-SOIC (3.9mm Width)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Eeprom Size: 128 x 8
• Ram Size: 64 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Processor Series: PIC12F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 64 B
• Interface Type: RS- 232/USB
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 6
• Number Of Timers: 2
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 53270-913
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM163014, DM164120-4
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 4-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Connectivity: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

4.0
For PIC12F629/675/PIC16F630/676 devices, once
code protection is enabled, all program memory loca-
tions, except 0X3FF, reads all ‘0’s. The ID locations and
the Configuration Word read out in an unprotected
fashion. Further programming is disabled for the entire
program memory. Data memory is protected with its
own Code Protection Data bit (CPD). It is possible to
program the ID locations and the Configuration Word.
4.1
It is recommended that the following procedure be
performed before any other programming is attempted.
It is also possible to turn code protection off (CPD = 1)
using this procedure. However, all data within the
program memory and the data memory will be erased
when this procedure is executed and thus, the security
of the data or code is not compromised.
4.2
© 2005 Microchip Technology Inc.
To allow portability of code, the programmer is required to read the Configuration Word and ID locations from the hex
file when loading the hex file. If Configuration Word information was not present in the hex file, then a simple warning
message may be issued. Similarly, while saving a hex file, Configuration Word and ID information must be included.
An option to not include this information may be provided.
Specifically for the PIC12F629/675/PIC16F630/676, the EEPROM data memory should also be embedded in the hex
file (see Section 4.3.2 “Embedding Data EEPROM Contents In Hex File”).
Microchip Technology Incorporated feels strongly that this feature is important for the benefit of the end customer.
CODE PROTECTION
Disabling Code Protection
Embedding Configuration Word and ID Information in the Hex File
PIC12F629/675/PIC16F630/676
To disable code-protect:
a)
b)
c)
d)
e)
f)
g)
h)
Note:
Read and store OSCCAL and BG bits.
Execute Load Configuration (000000).
Execute Bulk Erase Program Memory (001001).
Wait T
Execute Bulk Erase Data Memory (001011).
Wait T
Reset device to reset address counter before
reprogramming device.
Restore OSCCAL and BG bits.
ERA
ERA
To ensure system security, if CPD bit = 0,
step c) will also erase data memory.
.
.
DS41191D-page 19