PIC24HJ128GP504-I/PT Microchip Technology, PIC24HJ128GP504-I/PT Datasheet - Page 357

• Manufacturer Part Number: PIC24HJ128GP504-I/PT
• Description: IC PIC MCU FLASH 128K 44TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ128GP504-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 128KB (43K x 24)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 35
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 13x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 13-ch x 12-bit
• Controller Family/series: PIC24
• No. Of I/o's: 35
• Ram Memory Size: 8KB
• Cpu Speed: 40MIPS
• No. Of Timers: 7
• Embedded Interface Type: CAN, I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Revision E (January 2011)
This includes typographical and formatting changes
throughout the data sheet text. In addition, the
Preliminary marking in the footer was removed.
All occurrences of V
throughout the document.
All other major changes are referenced by their
respective section in the following table.
TABLE A-4:
© 2011 Microchip Technology Inc.
“High-Performance, 16-bit
Microcontrollers”
Section 2.0 “Guidelines for Getting Started
with 16-bit Microcontrollers”
Section 4.0 “Memory Organization”
Section 9.0 “Oscillator Configuration”
Section 20.0 “10-bit/12-bit Analog-to-Digital
Converter (ADC1)”
Section 25.0 “Special Features”
PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
Section Name
MAJOR SECTION UPDATES
DDCORE
have been removed
The high temperature end range was updated to +150ºC (see
“Operating
The frequency limitation for device PLL start-up conditions was
updated in
Start-up”.
The second paragraph in
The All Resets values for the following SFRs in the Timer Register
Map were changed (see
• TMR1
• TMR2
• TMR3
• TMR4
• TMR5
Added Note 3 to the OSCCON: Oscillator Control Register (see
Register
Added Note 2 to the CLKDIV: Clock Divisor Register (see
Register
Added Note 1 to the PLLFBD: PLL Feedback Divisor Register (see
Register
Added Note 2 to the OSCTUN: FRC Oscillator Tuning Register (see
Register
Updated the V
(see
Added a new paragraph and removed the third paragraph in
Section 25.1 “Configuration
Added the column “RTSP Effects” to the dsPIC33F Configuration
Bits Descriptions (see
Figure 20-1
9-1).
9-2).
9-3).
9-4).
Section 2.7 “Oscillator Value Conditions on Device
Range:”).
REFL
and
references in the ADC1 module block diagrams
Figure
Table
Update Description
Table
Section 2.9 “Unused I/Os”
25-2).
20-2).
Bits”.
4-5):
DS70293E-page 357
was updated.