PIC16F876-04/SP Microchip Technology, PIC16F876-04/SP Datasheet - Page 21

• Manufacturer Part Number: PIC16F876-04/SP
• Description: IC MCU FLASH 8KX14 EE 28DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F876-04/SP

• Program Memory Type: FLASH
• Program Memory Size: 14KB (8K x 14)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Eeprom Size: 256 x 8
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: MSSP/PSP/USART
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 3
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM163022, DV164120
• Minimum Operating Temperature: 0 C
• On-chip Adc: 5-ch x 10-bit
• Package: 28SPDIP
• Device Core: PIC
• Family Name: PIC16
• Maximum Speed: 4 MHz
• Data Rom Size: 256 B
• Height: 3.3 mm
• Length: 34.67 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4 V
• Width: 7.24 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

1.5.3
1997 Microchip Technology Inc.
Packaging Varieties
Depending on the development phase of your project, one of three package types would be used:
The first is a device with an erasure window. Typically these are found in packages with a ceramic
body. These devices are used for the development phase, since the device’s program memory
can be erased and reprogrammed many times.
The second package type is a low cost plastic package. This package type is used in production
where device cost is to be kept to a minimum.
Lastly, there is the DIE option. A DIE is an unpackaged device that has been tested. DIEs are
used in low cost designs and designs where board space is at a minimum.
quick summary of this.
Table 1-3:
Windowed
Plastic
DIE
Package Type
Typical Package Uses
Typical Usage
Development Mode
Production
Special Applications, such as those which require minimum board space
Section 1. Introduction
Table 1-3
DS31001A-page 1-9
shows a
1