PIC24FJ128GA106-I/PT Microchip Technology, PIC24FJ128GA106-I/PT Datasheet - Page 6

• Manufacturer Part Number: PIC24FJ128GA106-I/PT
• Description: IC PIC MCU FLASH 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ128GA106-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 128KB (43K x 24)
• Package / Case: 64-TFQFP
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 53
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDMA240015 - BOARD MCV PIM FOR 24F256GA
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24FJ256GA110 FAMILY
14. Module: Core (Instruction Set)
15. Module: Memory (Program Space
DS80368J-page 6
If an instruction producing a read-after-write stall
condition is executed inside a REPEAT loop, the
instruction will be executed fewer times than was
intended. For example, this loop:
repeat #0xf
inc [w1],[++w1]
will execute less than 15 times.
Work around
Avoid using REPEAT to repetitively execute
instructions that create a stall condition. Instead,
use a software loop using conditional branches.
The MPLAB
REPEAT loops that cause this erratum.
Affected Silicon Revisions
When accessing data in the PSV area of data
RAM, it is possible to generate a false address
error trap condition by reading data located pre-
cisely at the lower address boundary (8000h). If
data is read using an instruction with an
auto-decrement, the resulting RAM address will be
below the PSV boundary (i.e., at 7FFEh); this will
result in an address error trap.
This false address error can also occur if a 32-bit
MOV instruction is used to read the data at location
8000h.
Work around
Do not use the first location of a PSV page (address
8000h). The MPLAB
supports the option “-merrata=psv_trap” to
prevent it from generating code that would cause this
erratum.
Affected Silicon Revisions
A3
A3
X
X
A5
A5
X
Visibility)
®
C Compiler will not generate
®
C Compiler (v3.11 or later)
16. Module: ICSP™
17. Module: RTCC
The
(RB5/RB4), cannot be used to read or program the
device.
Work around
Use either PGEC2/PGED2 or PGEC1/PGED1.
Affected Silicon Revisions
Under certain circumstances, the value of the
Alarm Repeat Counter (ALCFGRPT<7:0>) may be
unexpectedly decremented. This happens only
when a byte write to the upper byte of ALCFGRPT
is performed in the interval between a device
POR/BOR and the first edge from the RTCC clock
source.
Work around
Do not perform byte writes on ALCFGRPT,
particularly the upper byte.
Alternatively, wait until one period of the SOSC
has completed before performing byte writes to
ALCFGRPT.
Affected Silicon Revisions
A3
A3
X
X
ICSP/ICD
A5
A5
 2010 Microchip Technology Inc.
port
pair,
PGEC3/PGED3