PIC18F27J13-I/SO Microchip Technology, PIC18F27J13-I/SO Datasheet - Page 228

• Manufacturer Part Number: PIC18F27J13-I/SO
• Description: IC PIC MCU 128KB FLASH 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J13-I/SO

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: SOIC
• Supply Voltage Range: 1.8V To 5.5V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: I2C, SPI, EUSART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 19
• Number Of Timers: 8
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: DM164128, DM180021, DM183026-2, DV164131, MA180030, DM183022, DM183032, DV164136, MA180024
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180030 - BOARD DEMO PIC18F47J13 FS USBMA180029 - BOARD DEMO PIC18F47J53 FS USB
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18F47J13 FAMILY
15.5.4
When Timer3/5 Gate Single Pulse mode is enabled, it
is possible to capture a single pulse gate event.
Timer3/5 Gate Single Pulse mode is first enabled by
setting the TxGSPM bit (TxGCON<4>). Next, the
TxGGO/TxDONE bit (TxGCON<3>) must be set.
The Timer3/5 will be fully enabled on the next incre-
menting edge. On the next trailing edge of the pulse,
the TxGGO/TxDONE bit will automatically be cleared.
FIGURE 15-4:
DS39974A-page 228
TMRxGIF
TMRxGE
TxGSPM
TxDONE
TxGPOL
Timer3/5
TxGGO/
TxGVAL
TxG_IN
TxCKI
TIMER3/5 GATE SINGLE PULSE
MODE
TIMER3/5 GATE SINGLE PULSE MODE
N
Cleared by Software
Counting Enabled on
Rising Edge of TxG
Set by Software
Preliminary
N + 1
No other gate events will be allowed to increment
Timer3/5 until the TxGGO/TxDONE bit is once again
set in software.
Clearing the TxGSPM bit will also clear the
TxGGO/TxDONE
Figure 15-4.)
Simultaneously, enabling the Toggle mode and the
Single Pulse mode will permit both sections to work
together. This allows the cycle times on the Timer3/5
gate source to be measured. (For timing details, see
Figure 15-5.)
Set by Hardware on
Falling Edge of TxGVAL
Cleared by Hardware on
Falling Edge of TxGVAL
N + 2
bit.
 2010 Microchip Technology Inc.
(For
timing
details,
Software
Cleared by
see