PIC16C554-04/P Microchip Technology, PIC16C554-04/P Datasheet - Page 99

• Manufacturer Part Number: PIC16C554-04/P
• Description: IC MCU OTP 512X14 18DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C554-04/P

• Core Size: 8-Bit
• Program Memory Size: 896B (512 x 14)
• Core Processor: PIC
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 13
• Program Memory Type: OTP
• Ram Size: 80 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 18-DIP (0.300", 7.62mm)
• Controller Family/series: PIC16C
• No. Of I/o's: 13
• Ram Memory Size: 80Byte
• Cpu Speed: 4MHz
• No. Of Timers: 1
• Core: PIC
• Processor Series: PIC16C
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 20 MHz
• Data Ram Size: 80 B
• Data Rom Size: 80 B
• Number Of Programmable I/os: 13
• Number Of Timers: 8
• Operating Supply Voltage: 2.5 V to 5.5 V
• Mounting Style: Through Hole
• Height: 3.3 mm
• Length: 22.86 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 3 V
• Width: 6.35 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: ISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING309-1059 - ADAPTER 18 ZIF BD W/18SO PLUGSDVA16XP180 - ADAPTER DEVICE FOR MPLAB-ICEAC164010 - MODULE SKT PROMATEII DIP/SOIC
• Eeprom Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

APPENDIX A:
The following are the list of enhancements over the
PIC16C5X microcontroller family:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Wake-up from SLEEP through interrupt is
11. Two separate timers, Oscillator Start-up Timer
12. PORTB has weak pull-ups and interrupt-on-
13. Timer0 clock input, T0CKI pin is also a port pin
14. FSR is made a full 8-bit register.
15. “In-circuit programming” is made possible. The
16. PCON status register is added with a Power-on
17. Code protection scheme is enhanced such that
18. PORTA inputs are now Schmitt Trigger inputs.
 2002 Microchip Technology Inc.
Instruction word length is increased to 14 bits.
This allows larger page sizes both in program
memory (4K now as opposed to 512 before) and
register file (up to 128 bytes now versus 32
bytes before).
A PC high latch register (PCLATH) is added to
handle program memory paging. PA2, PA1, PA0
bits are removed from STATUS register.
Data memory paging is slightly redefined.
STATUS register is modified.
Four new instructions have been added:
RETURN
Two instructions
phased out although they are kept for
compatibility with PIC16C5X.
OPTION
addressable.
Interrupt capability is added. Interrupt vector is
at 0004h.
Stack size is increased to 8 deep.
RESET vector is changed to 0000h.
RESET of all registers is revised. Three different
RESET (and wake-up) types are recognized.
Registers are reset differently.
added.
(OST) and Power-up Timer (PWRT) are
included for more reliable power-up. These
timers
unnecessary delays on power-up and wake-up.
change feature.
(RA4/T0CKI) and has a TRIS bit.
user can program PIC16C55X devices using
only five pins: V
RB7 (data in/out).
Reset (POR) status bit.
portions of the program memory can be
protected, while the remainder is unprotected.
,
RETFIE
are
and
invoked
,
DD
ADDLW
TRIS
TRIS
ENHANCEMENTS
, V
SS
, and
and
, V
selectively
registers
PP
SUBLW
OPTION
, RB6 (clock) and
.
are
are being
to
made
avoid
Preliminary
APPENDIX B:
To convert code written for PIC16C5X to PIC16C55X,
the user should take the following steps:
1.
2.
3.
4.
5.
Remove any program memory page select
operations (PA2, PA1, PA0 bits) for
Revisit any computed jump operations (write to
PC or add to PC, etc.) to make sure page bits
are set properly under the new scheme.
Eliminate any data memory page switching.
Redefine data variables to reallocate them.
Verify all writes to STATUS, OPTION, and FSR
registers since these have changed.
Change RESET vector to 0000h.
COMPATIBILITY
PIC16C55X
DS40143D-page 97
CALL
,
GOTO
.