PIC18F24J11-I/SS Microchip Technology, PIC18F24J11-I/SS Datasheet - Page 265

• Manufacturer Part Number: PIC18F24J11-I/SS
• Description: IC PIC MCU FLASH 16K 2V 28-SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F24J11-I/SS

• Core Size: 8-Bit
• Program Memory Size: 16KB (8K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SSOP
• Controller Family/series: PIC18
• No. Of I/o's: 16
• Ram Memory Size: 3.6875KB
• Cpu Speed: 48MHz
• No. Of Timers: 5
• Interface: EUSART, I2C, SPI
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3776 B
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DM183022, DM183033, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164331 - MODULE SKT FOR 28SSOP 18F45J10XLT28SS-1 - SOCKET TRANSITION ICE 28SSOP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

18.0
The Master Synchronous Serial Port (MSSP) module is
a serial interface, useful for communicating with other
peripheral or microcontroller devices. These peripheral
devices include serial EEPROMs, shift registers,
display drivers and A/D Converters.
18.1
The MSSP module can operate in one of two modes:
• Serial Peripheral Interface (SPI)
• Inter-Integrated Circuit (I
The I
hardware:
• Master mode
• Multi-Master mode
• Slave mode with 5-bit and 7-bit address masking
All members of the PIC18F46J11 family have two
MSSP modules, designated as MSSP1 and MSSP2.
The modules operate independently:
• PIC18F4XJ11 devices – Both modules can be
• PIC18F2XJ11 devices:
© 2009 Microchip Technology Inc.
- Full Master mode
- Slave mode (with general address call)
(with address masking for both 10-bit and 7-bit
addressing)
configured for either I
- MSSP1 can be used for either I
- MSSP2 can be used only for SPI
communication
communication
2
C interface supports the following modes in
MASTER SYNCHRONOUS
SERIAL PORT (MSSP)
MODULE
Master SSP (MSSP) Module
Overview
2
C or SPI communication
2
C™)
2
C or SPI
PIC18F46J11 FAMILY
All of the MSSP1 module-related SPI and I
functions are hard-mapped to specific I/O pins.
For MSSP2 functions:
• SPI I/O functions (SDO2, SDI2, SCK2 and SS2)
• I
On all PIC18F46J11 family devices, the SPI DMA capa-
bility can only be used in conjunction with MSSP2. The
SPI DMA feature is described in Section 18.4 “SPI
DMA Module”.
are all routed through the Peripheral Pin Select
(PPS) module.
These functions may be configured to use any of
the RPn remappable pins, as described in
Section 9.7 “Peripheral Pin Select (PPS)”.
locations.
Note:
2
C functions (SCL2 and SDA2) have fixed pin
references to an MSSP module in any of its
Throughout
operating modes may be interpreted as
being equally applicable to MSSP1 or
MSSP2. Register names and module I/O
signals use the generic designator ‘x’ to
indicate the use of a numeral to distinguish
a particular module when required. Control
bit names are not individuated.
this
section,
DS39932C-page 265
generic
2
C I/O