CB2016T101K Taiyo Yuden, CB2016T101K Datasheet - Page 9

• Manufacturer Part Number: CB2016T101K
• Description: INDUCTOR POWER 100UH 170MA 0806
• Manufacturer: Taiyo Yuden
• Series: CBr

Specifications of CB2016T101K

• Inductance: 100µH
• Current: 170mA
• Current - Saturation: 70mA
• Current - Temperature Rise: 170mA
• Tolerance: ±10%
• Dc Resistance (dcr): 5.850 Ohm Max
• Self Resonant Freq: 8MHz
• Package / Case: 0806 (2016 Metric)
• Mounting Type: Surface Mount
• Operating Temperature: -25°C ~ 105°C
• Frequency - Test: 796kHz
• Applications: General Purpose
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Shielding: -
• Q @ Freq: -
• Other names: 587-2463-2

wound0103_reli-PRP4
【Test Methods and Remarks】
【Test Methods and Remarks】
【Test Methods and Remarks】
【Test Methods and Remarks】
【Test Methods and Remarks】
■
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
15.Resistance to soldering
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LEM Series
LEM2520
16.Resisitance to solvent
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM, LEM Series
17.Thermal shock
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM Series
LEM Series
18.Damp heat life test
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM Series
LEM Series
19.Loading under damp heat life test
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM Series
LEM Series
LEM：
Reflow condition 3 times of reflow over at 220±5℃ for 40sec. MAX, With Peak temperature at 240±5℃ for 5 sec.
MAX. （Refer to a Profile of chart below.）
Flow condition
Solder temperature：260±5℃
Duration：10±1sec. Once
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：
3 times of reflow oven at 230℃ MIN for 40sec. with peak temperature at 260 ℃ for 5sec.
Solvent temperature：Room temperature
Type of solvent：Isopropyl alcohol
Cleaning conditions：90s. Immersion and cleaning.
LEM : Conditions for 1cycle
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF： ー40～＋85℃, maintain times 30min. ,100 cycle
Temperature：60±2℃
Humidity：90～95％RH
Duration：1000 hrs
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM：Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
Temperature：60±2℃
Humidity：90～95％RH
Duration：1000 hrs
Applied current：Rated current
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM：Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
RELIABILITY DATA
Number of cycle：100 cycle
Recovery：At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
Step
1
2
Temperature （ ℃） Duration （ min）
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
ー40
＋85
30
30
No significant abnormality in appearance
Inductance change:Within±10％
Inductance change :Within±10％
Q→ R12～4R7：30 min.
Inductance change:Within±10％
Inductance change :Within±10％
Q→ R12～4R7：30 min.
Inductance change:Within±10％
Inductance change :Within±10％
Q→ R12～4R7：30 min.
Inductance change:Within±10％
Inductance change:Within±5％
No significant abnormality in appearance.
5R6～330：25 min.
390～820：20 min.
101：15 min.
5R6～330：25 min.
390～820：20 min.
101：15 min.
5R6～330：25 min.
390～820：20 min.
101：15 min.
1 1
No significant abnormality in appearance.
No significant abnormality in appearance.
No significant abnormality in appearance.
wound0103_reli_e-01