71918-126LF FCI, 71918-126LF Datasheet - Page 15

• Manufacturer Part Number: 71918-126LF
• Description: CONN HEADER 26POS DUAL VERT PCB
• Manufacturer: FCI
• Series: Quickie™, Basics+r
• Type: PCB Plugr

Specifications of 71918-126LF

• Contact Type: Male Pin
• Connector Type: Header, Shrouded
• Number Of Positions: 26
• Number Of Positions Loaded: All
• Pitch: 0.100" (2.54mm)
• Number Of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Contact Mating Length: 0.228" (5.80mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Latch Lock/Eject Hooks
• Contact Finish: Gold, GXT™
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Gray
• Agency Approvals: CSA, UL
• Angle: Straight
• Brand/series: Quickie®
• Contact Plating: Gold/GXT™
• Current, Rating: 3 A
• Flammability Rating: UL94V-0
• Length, Overall: 85.34 mm
• Length, Pin: 0.114 "
• Material, Contact: Phosphor Bronze
• Material, Housing: Thermoplastic
• Mounting Hole Size: 1.02, 2.8 "
• Number Of Contacts: 26
• Pin Spacing: 2.54 mm
• Special Features: Eject Latch
• Temperature, Operating: -65 to +125 °C
• Voltage, Rating: 1500 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 609-1756

4.0
TITLE
Quickie™ Connector System
Copyright
Form E-3334
Rev E
QUALITY ASSURANCE PROVISIONS
4.1
4.2
4.3
FCI
Equipment Calibration
All test equipment and inspection facilities used in the performance of any test shall be maintained in
a calibration system in accordance with MIL-C-45662.
Inspection Conditions
Unless otherwise specified herein, all inspections shall be performed under the following ambient
conditions.
(a) Temperature - 25 o C + 5 o C
(b) Relative Humidity - 30 to 80%
(c) Barometric Pressure - Local Ambient
Qualification Inspection
Qualification inspection shall be performed on sample units produced with equipment and
procedures normally used in production.
4.3.1
4.3.2
4.3.3
Sample. Six (6) of the largest and three (3) of the smallest population connectors shall be
subjected to the qualification inspection.
Preparation of Samples. The various test samples shall be configured and terminated as
shown in Table II.
Test Sequence. The sample connectors shall be subjected to the inspections specified in
Table III in the order shown.
TYPE
PRODUCT SPECIFICATION
PDM: Rev:F
STATUS:
NUMBER
PAGE
AUTHORIZED BY
CLASSIFICATION
M.Barrios
15 of 20
Released
BUS-12-082
UNRESTRICTED
Printed: Apr 13, 2007
REVISION
DATE
31 Jul 06
F
GS-01-001
.