DF13-10P-1.25DS(20) Hirose Electric Co Ltd, DF13-10P-1.25DS(20) Datasheet - Page 10

• Manufacturer Part Number: DF13-10P-1.25DS(20)
• Description: CONN HEADER 10POS 1.25MM R/A TIN
• Manufacturer: Hirose Electric Co Ltd
• Series: DF13r

Specifications of DF13-10P-1.25DS(20)

• Contact Type: Male Pin
• Connector Type: Header, Shrouded
• Number Of Positions: 10
• Number Of Positions Loaded: All
• Pitch: 0.049" (1.25mm)
• Number Of Rows: 1
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Features: Board Guide
• Contact Finish: Tin
• Color: Beige
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Contact Finish Thickness: -
• Row Spacing: -
• Fastening Type: -
• Contact Mating Length: -
• Other names: *DF13-10P-1.25DS(20); DF13-10P-1.25DS; DF13-10P-1.25DS20; H2206

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BPrecautions
1. Recommended Temperature
2. Recommended Soldering
3. Recommended Screen
4. Board Warpage (SMT)
5. Recommended Soldering
5.
6. Cleaning Condition
7. Connection Condition
8. Cautions
9. Precautions
Profile (SMT)
Condition (SMT)
Thickness (SMT)
Condition (Through hole)
Note 1.Up to 2 cycles of Reflow soldering are possible under the same conditions, provided
Note 2.The temperature profile indicates the board surface temperature at the point of
Note 3.Slight variations in color of the plastic compounds do not affect form, fit or function of
0.15
Max 0.03mm in the connector center area, based on both connector edges
Refer to Nylon Connector Use Hand book.
Refer to Nylon Connector Use Hand book.
Refer to Nylon Connector Use Hand book.
Carefully carry out the crimping operation according to "Crimping Condition Sheet" and
"Crimping Quality Standard", because the crimping contact is an extremely small style.
Be careful for the excessive scoop insertion/extraction, which will cause damage to the product.
that there is a return to normal temperature between the first and second cycle.
contacts with the connector terminals.
the connector.
0.2mm
DF13 Series 1.25mm Pitch Miniature Crimping Connector
B251