HPCPR41F1S Switchcraft Inc., HPCPR41F1S Datasheet - Page 106

• Manufacturer Part Number: HPCPR41F1S
• Description: CONN PLUG PANEL RND 4PIN .187
• Manufacturer: Switchcraft Inc.
• Series: HPCr
• Type: Powerr

Specifications of HPCPR41F1S

• Rohs Information: Switchcraft RoHS Info.
• Connector Type: Jack, Non-Gendered
• Number Of Positions: 4
• Mounting Type: Panel Mount, Flange
• Termination: Quick Connect - .187" (4.7mm)
• Fastening Type: Push-Pull
• Shell Material, Finish: Thermoplastic
• Gender: PL
• Body Orientation: Straight
• Housing Material: Thermoplastic
• Number Of Contacts: 4POS
• Number Of Ports: 1Port
• Number Of Terminals: 4
• Current Rating (max): 50A
• Contact Material: Copper Alloy
• Operating Temp Range: -55C to 85C
• Voltage Rating Max: 1500VAC
• Mounting Style: Panel
• Termination Method: Faston
• Contact Plating: Silver
• Product Diameter (mm): 50.8mm
• Product Length (mm): 33.3mm
• Standard: Speakon, HPC
• Number Of Positions / Contacts: 4
• Color: Black
• Voltage Rating: 1500 Volts
• Current Rating: 50 Amps
• Termination Style: Quick Disconnect
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Orientation: -
• Shell Size - Insert: -
• Ingress Protection: -
• Shell Size, Military: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

FAX: 773 792 - 2129
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
1/4" RIGHT-ANGLE PHONE JACKS
These low-profile phone jacks have “snap-in” PC mounting,
right-angle plug insertion and available with 2- and 3-conductor
circuits and plastic or metal bushings. Ideal for telecommunications,
data processing and other high quality audio connecting
applications.
SERIES SN37A - Right-angle PC mount phone jack with molded
plastic housing. Only .375" high, this jack features a plain
(non-threaded) bushing and accepts commercial standard phone
plugs with .25" diameter finger.
Jack circuit selection:
2-conductor • Single open circuit • Shunted tip
3-conductor • Double open circuit • Shunted tip and ring
Jack housing snaps into PC boards (.062" thick) and features
molded tension fingers to provide stable mount. Location pin
polarizes mounting for correct insertion every time. Clearance
between housing facilitates board cleaning without disturbing
internal springs. SN37 without tension fingers available on
special order.
Molded housing protects internal parts and allows high density
packaging. Supplied with “Snap-On” cover.
SERIES SN49A - Similar to Series SN37A, except .492" high and
insulated/plain (non-threaded) bushing. “Snap-On” cover available
on special order only.
SERIES SN49B - Similar to Series SN37A, except .492" high and
insulated threaded bushing. Washer and hex nut for bushing
mount supplied. “Snap-On” cover available on special order only.
SERIES SN49C - Similar to Series SN37A, except .492" high and
threaded metal bushing. Washer and hex nut for bushing mount
supplied. “Snap-On” cover available on special order only.
SERIES SN70B - This series features threaded/insulated
bushing and .708" in height. Circuit selection and housing features
are same as Series SN49B. “Snap-On” cover not available.
SERIES SN70C - Same as Series SN70B, except bushing is
threaded metal type.
SPECIFICATIONS
MECHANICAL
Shock: Per MIL-STD-202, method 213.
Vibration: Per MIL-STD-202, method 201.
SN37A14B with cover Number P2993
SERIES SN37, SN49 AND SN70
SN49B12B with cover Number P2994
SN49C12B
Insertion Force: 8 pounds maximum.
Withdrawal Force: 1.5 pounds minimum.
Life: 10,000 cycles minimum.
ELECTRICAL
Insulation Resistance: 2 x 106 MΩ at 500 V DC per
MIL-STD-202, method 302 (initial).
Dielectric Withstanding Voltage: 500 V AC.
ENVIRONMENTAL
Thermal Range: -55°C (-67°F) to +85°C (+185°F) Non
operating. -20°C to + 65°C Operating.
Thermal Shock: Per MIL-STD-202d, method 107.
Humidity: Per MIL-STD-202, method 106, less steps 7A and 7B.
Salt Spray: Per MIL-STD-202, method 101.
MATERIAL
Housing and Cover: Black thermoplastic, UL 94V-O.
Contact Springs: Copper alloy with tin-plated terminals.
Hardware: Nickel-plated copper alloy.
Metal Bushing: Nickel-plated copper alloy.
ORDERING
1. Order jacks from tables on page 103.
2. For all special order items, contact Switchcraft.
DIMENSIONS ARE FOR REFERENCE ONLY
SN70B12A
RIGHT-ANGLE PHONE JACKS
RIGHT-ANGLE PHONE JACKS
JACKS AND PLUGS
(mm)
Inch
SN49A12B
SN70C14B
101