10035388-500 FCI, 10035388-500 Datasheet - Page 5

• Manufacturer Part Number: 10035388-500
• Description: PWR EDGE CARD 28PX2 F/G
• Manufacturer: FCI

Specifications of 10035388-500

• Card Type: Dual Edge
• Card Thickness: 0.070" (1.80mm)
• Gender: Female
• Number Of Positions: 56
• Pitch: 0.100" (2.54mm)
• Number Of Rows: 2
• Mounting Type: Through Hole, Right Angle
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Black
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

NUMBER
GS-12-259
TITLE
Copyright FCI
Form E-3334
Rev F
R/A POWER EDGE CARD CONNECTOR PRODUCT SPEC.
4.6.2 Random Vibration
4.6.3 High Temperature Life
4.6.4 High Temperature Life (preconditioning)
4.6.5 Thermal Shock
4.6.6 Cyclic Temperature & Humidity
4.6.7 Mixed Flowing Gas
4.6.8 Thermal Disturbance
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Test Condition: Per EIA-364-28, Test condition III. Sine sweep from 10~2000~10Hz
traversed in 20 minutes, 1.52mm, 15G; 12 times for each direction, 12 hours totally.
Requirement: No physical damages and no electrical discontinuity more than 1µ
second.
Test condition: per EIA 364-17, Test method A, 240 hours at temperature 105±2C° to
pertaining of 65°C for 10 years.
Requirement: No physical damages and meets sequenced tests.
Test condition: per EIA 364-17, Test method A, 120 hours at temperature 105±2C° to
pertaining of 65°C for 10 years.
Requirement: No physical damages and meets sequenced tests.
Test condition: per EIA 364-32, Test Condition 1. Cycle the connector –55 to +85°C.
Dwell time of 30minutes at extreme temperature. Transfer time 5 minutes max.
Requirement: No physical damages and meets sequenced tests.
Test condition: per EIA 364-31,method II. Cycle the connector between 40°C±2°C at
humidity of 90% to 95%.The test condition A will be used and the test duration is 96
hours.
Requirement: No physical damages and meets sequenced tests.
Test condition: per EIA 364-65, Class IIA. Perform 10 days.
Requirement: No physical damages and meets sequenced tests.
Test condition: per EIA 364-1000.01 Test Group 4. Cycle the connector between
15°C±3°C and 85°C±3°C, as measured on the part. Ramps should be a minimum of
2°C per minute, and dwell times should insure that the contacts reach the temperature
extremes (a minimum of 5 minutes) Humidity is not controlled. Perform 10 such cycles.
Requirement: No physical damages and meets sequenced tests.
TYPE
PRODUCT SPECIFICATION
PDM: Rev:G
STATUS:
PAGE
AUTHORIZED BY
CLASSIFICATION
Released
Julia Wang
5 of 9
UNRESTRICTED
Printed: May 26, 2010
REVISION
DATE
02/06/09
G
GS-01-001
.