SA12AG ON Semiconductor, SA12AG Datasheet - Page 5

• Manufacturer Part Number: SA12AG
• Description: TVS ZENER UNIDIR 500W 12V AXIAL
• Manufacturer: ON Semiconductor
• Series: MiniMosorb™r
• Type: Zenerr

Specifications of SA12AG

• Voltage - Reverse Standoff (typ): 12V
• Voltage - Breakdown: 13.3V
• Power (watts): 500W
• Polarization: Unidirectional
• Mounting Type: Through Hole
• Package / Case: Axial
• Polarity: Unidirectional
• Clamping Voltage: 19.9 V
• Operating Voltage: 12 V
• Breakdown Voltage: 14 V
• Termination Style: Axial
• Peak Surge Current: 25.1 A
• Peak Pulse Power Dissipation: 500 W
• Maximum Operating Temperature: + 150 C
• Minimum Operating Temperature: - 55 C
• Dimensions: 3.6 mm Dia. x 3.6 (Max) mm W x 7.6 mm L
• Brand/series: MiniMOSORB™/SA5.0A Series
• Current, Surge: 25.1 A
• Primary Type: Transient Voltage Surge Suppressor
• Termination: Solder
• Voltage, Clamping: 19.9 V
• Number Of Elements: 1
• Package Type: Case 59AA-01
• Operating Temperature Classification: Military
• Reverse Breakdown Voltage: 13.3V
• Reverse Stand-off Voltage: 12V
• Leakage Current (max): 1uA
• Peak Pulse Current: 25.1A
• Test Current (it): 1mA
• Operating Temp Range: -55C to 150C
• Mounting: Through Hole
• Pin Count: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Industrial Equipment
• Other names: SA12AGOS

PUBLICATION ORDERING INFORMATION
MiniMOSORB and Surmetic are trademarks of Semiconductor Components Industries, LLC.
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
ON Semiconductor and
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
OPTIONAL AS NEEDED
POLARITY INDICATOR
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
(SEE STYLES)
K
N. American Technical Support: 800−282−9855 Toll Free
Europe, Middle East and Africa Technical Support:
Japan Customer Focus Center
A
PACKAGE DIMENSIONS
USA/Canada
Phone: [phone]
Phone: 81−3−5773−3850
D
B
K
http://onsemi.com
CASE 59AA−01
AXIAL LEAD
ISSUE A
5
NOTES:
1. DIMENSIONING AND TOLERANCING PER
2. CONTROLLING DIMENSION: INCH.
3. ALL RULES AND NOTES ASSOCIATED WITH
4. POLARITY DENOTED BY CATHODE BAND.
5. LEAD DIAMETER NOT CONTROLLED WITHIN
6. REPLACES CASE 59−09.
ANSI Y14.5M, 1982.
JEDEC DO−41 OUTLINE SHALL APPLY.
F DIMENSION.
DIM
A
B
D
K
0.228
0.102
0.028
1.000
MIN
INCHES
0.299
0.142
0.034
MAX
−−−
25.44
MILLIMETERS
5.80
2.60
0.71
MIN
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MAX
7.60
3.60
0.86
−−−
SA5.0A/D