1055546-1 Tyco Electronics, 1055546-1 Datasheet - Page 2

• Manufacturer Part Number: 1055546-1
• Description: TOOL TORQUE WRENCH 1/4" & 5/16"
• Manufacturer: Tyco Electronics

Specifications of 1055546-1

• Tip - Type: Torque, 0.25" (6.4mm) and 0.31" (8.0mm)
• Tool Type: Wrench
• Features: Protective Cover and Interchangeable Head
• Length: 7.0" (177.8mm)
• Lead Free Status / RoHS Status: Not applicable / Not applicable

Refer to Figure 2 for the appropriate replacement
wrench head part numbers.
The wrenches are designed to be used in the
clockwise or counterclockwise direction.
3. OPERATION OF THE WRENCHES
2 of 2
PART NUMBER
NOTE
ELECTRONICS
ELECTRONICS
1-1406504-0
1-1406504-1
1-1406504-2
1-1406504-3
1-1406504-4
1-1406504-5
1406504-1
1406504-2
1406504-3
1406504-4
1406504-5
1406504-6
1406504-7
1406504-8
1406504-9
TYCO
If a wrench has not been used recently, move the
wrench head back and forth several times,
listening for audible clicks." Clicking the wrench
head back and forth spreads lubricant throughout
the internal mechanism to improve wrench
performance.
Figure 2
12.8
19.6
10.4
17.6
14.6
16.0
20.8
11.2
mm
6.4
8.0
9.6
7.1
8.8
4.0
6.1
WRENCH SIZE
Production Torque Wrenches
INCHES
[13/32]
[11/16]
[11/32]
[13/16]
[15/64]
[5/16]
[7/16]
[9/32]
[9/16]
[5/32]
[1/4]
[3/8]
[1/2]
[3/4]
[5/8]
Using the appropriate sized head (Figure 1), turn the
wrench clockwise (or counterclockwise) until there is
an audible “click.” This “click” indicates that the proper
torque has been achieved.
4. REPLACEMENT
Remove the wrench head by pulling it off the
production torque wrench. Then replace the head with
the appropriate head listed in Figure 2.
Order replacement parts through your Tyco
Electronics Representative, or call 1–800–526–5142,
or send a facsimile of your purchase order to
717–986–7605, or write to:
5. REVISION SUMMARY
Per EC 0990–0037–05:
CAUTION
CAUTION
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS CORPORATION
P.O. BOX 3608
HARRISBURG, PA 17105–3608
S Updated document to corporate requirements
S Added part number 1490262–1 and related
information to Figure 1
Do NOT overtighten the connector with the
torque wrench. Over-tightening the wrench could
result in inaccurate torque settings.
Do not use or re-terminate damaged connectors.
408-8676
Rev D