ATC 2281 Astro Tool Corp, ATC 2281 Datasheet - Page 26

• Manufacturer Part Number: ATC 2281
• Description: TOOL EXTRACTION #8 CONTACT METAL
• Manufacturer: Astro Tool Corp

Specifications of ATC 2281

• Tool Type: Extraction Tool
• For Use With/related Products: Circular Connector Contacts
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: ATC2281

Internally adjusted
The internally adjusted line of crimp tools is designed for adjustments by
qualified personnel only. This tool features an adjustment knob located
inside the front cover plate of the tool. Once set by qualified personnel,
the tool is not adjustable by the assembly line operator, thus helping
to eliminate operator error. The tool operates with replaceable, single
position locators. When using these locators, the internally adjustable
tools can crimp a wire range of 8-30 AWG. The internally adjusted tools
can be adapted to accept the MS3191-4 and M22520/1 turrets by
ordering a 620754 turret adaptor assembly.
Standard internally adjustable tool: 612871
Mini tip tool: part number 612768.
4 indent style tool: part number 11221.
4 indent style tool with 3 locators: part number 10967.
3212 (20 GA.)
Contact size
20
16
12
20
16
22
20
16
12
locator Part #
3212
3213
3214
11568-1
11568-1
612507
613264
7005626
7008289
7008300
7008290
3213 (16 GA.)
Contacts accommodated (Ref.)
MS 3190 MS 24254
MS 3192 MS 3193 MS 24225 NAS 1662 NAS 1663 MS 18134
MS 18136 M39029/4 M39020/5
MS 17803 MS 17807
MS 17804 MS 17808 M39029/34 M39029/35
MS 27491-22, 22D, 22M MS 27492-22, 22D, 22M MS 27493-22, 22D, 22M MS 27494-22, 22D, 22M M39029/57 M39029/58
M39029/56 MS 27490-22, 22D, 22M
M39029/56 M39029/57 M39029/58 MS 27490-20 MS27491-20 MS27492-20 MS27493-20 MS27494-20
M39029/58 MS 27493-16 MS 27494-16
M39020/56 M39029/57 MS 27490-16 MS 27491-16 MS 27492-16
M39029/56 M39029/57 M39029/58 MS 27490-12 MS 27491-12 MS 27492-12 MS 27493-12 MS 27494-12
3214 (12 GA.)
© Copyright 2008 Astro Tool Corp. , 21615 SW Tualatin Valley Highway, Beaverton, OR 97006
locators for Ms applications
externally adjusted
The externally adjustable line of tools is designed to accept MS3191-
4 and M22520/1 style turret head assemblies. Theses tools have a
micrometer style adjustment knob which allows them to be adjusted and
set to crimp depths ranging from .015 to .085 inches in increments of
.001. The dial indicator on this style of tool has three sets of numbers.
One set indicates crimp depth in thousandths of an inch. One set
corresponds to the selector knob settings on the M22520/1-01 (615708)
tool. The third set corresponds to the selector settings on the MS3191-4
(612179) tool. These multi-selector readings allow the tool to be used
easily with the data for crimp settings located on all Mil-Spec turrets.
In its turret-operated configuration these tools crimp contact sizes 12
through 26 and wire sizes 12 through 30 AWG.
Standard externally adjustable tool: 612141
This tool can be adapted for use with locators by ordering the 615161
slide strap adaptor assembly.
A tool with a mini tip indenter is available under part number 615250.
•
Tel: [phone]
•
www.astrotool.com
25