S101DH1 Sharp Microelectronics, S101DH1 Datasheet - Page 12

• Manufacturer Part Number: S101DH1
• Description: RELAY SSR 120VAC 1.5A TRIC 16DIP
• Manufacturer: Sharp Microelectronics
• Series: S101r

Specifications of S101DH1

• Circuit: SPST-NO (1 Form A)
• Output Type: AC
• Load Current: 1.5A
• Voltage - Input: 1.2VDC
• Voltage - Load: 0 ~ 120 V
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Package / Case: 16-DIP (0.300", 7.62mm), 10 Leads
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• On-state Resistance: -
• Other names: 425-1206-5

● Cleaning instructions
● Presence of ODC
Solvent cleaning :
Ultrasonic cleaning :
Recommended solvent materials :
Solvent temperature should be 45˚C or below. Immersion time should be 3minutes or less.
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol.
In case the other type of solvent materials are intended to be used, please make sure they work fine in
actual using conditions since some materials may erode the packaging resin.
This product shall not contain the following materials.
And they are not used in the production process for this device.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
12
S101DH1 Series
S201DH1 Series
Sheet No.: D4-A01201EN