FS-9019 Digi International, FS-9019 Datasheet - Page 12

• Manufacturer Part Number: FS-9019
• Description: JTAG-BOOSTER FOR ALCHEMY 3.3V
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of FS-9019

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: AMD Alchemy, 3.3V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

AMD Alchemy Solutions Processors
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10) A Flash AMD 29LV160B selected with RCS0# was found.
(11) The resulting data bus size is printed here.
(12) In this example 4 blocks must be erased.
(13) If available, the "Unlock Bypass Mode" is activated. In boundary scan
12
The initialization file JTAu1000.INI was found in the current directory.
The target identification line of the initialization file is printed here.
The resulting I/O-address of the parallel port is printed here. With
WinNT/Win2000/WinXP you must specify the option /LPT2 to access to the
standard address 378h.
A JTAG-Booster is found on the parallel port
The JTAG chain is analyzed. There may be several parts in the JTAG
chain. The chain is analyzed and all parts except the AMD Alchemy
Solutions Au1000 Processor are switched to bypass mode.
The length of all instruction registers in the JTAG chain are added.
The position of the AMD Alchemy Solutions Au1000 Processor in the JTAG
chain is assumed to be zero, if not specified in the command line (see
option /CPUPOS=).
The position of the JTAG instruction register of the AMD Alchemy Solutions
Au1000 Processor is assumed to be zero, if not specified in the command
line (see option /IROFFS=).
The real length of the boundary scan register is displayed here and
compared with the boundary scan register length of a AMD Alchemy
Solutions Au1000 Processor.
mode, this increases the programming performance by 67..75%.
JTAG_alchemyb.doc