ADP2504-2.8-EVALZ Analog Devices Inc, ADP2504-2.8-EVALZ Datasheet - Page 15

• Manufacturer Part Number: ADP2504-2.8-EVALZ
• Description: BOARD EVALUATION ADP2504 2.8V
• Manufacturer: Analog Devices Inc

Specifications of ADP2504-2.8-EVALZ

• Main Purpose: DC/DC, Step Up or Down
• Outputs And Type: 1, Non-Isolated
• Power - Output: 2.8W
• Voltage - Output: 2.8V
• Current - Output: 1A
• Voltage - Input: 2.5 ~ 5.5V
• Regulator Topology: Buck-Boost
• Frequency - Switching: 2.5MHz
• Board Type: Fully Populated
• Utilized Ic / Part: ADP2504
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PCB LAYOUT GUIDELINES
Poor layout can affect ADP2503/ADP2504 performance, caus-
ing electromagnetic interference (EMI) and electromagnetic
compatibility (EMC) performance, ground bounce, and voltage
losses. Poor layout can also affect regulation and stability. A good
layout is implemented using the following rules:

Place the inductor, input capacitor, and output capacitor
close to the IC using short tracks. These components carry
high switching frequencies and large tracks act like antennas.
Figure 31. ADP2503/ADP2504 Evaluation Board for Fixed Output Voltages
Rev. A | Page 15 of 16



Route the output voltage path away from the inductor and
SW node to minimize noise and magnetic interference.
Maximize the size of ground metal on the component side
to help with thermal dissipation.
Use a ground plane with several vias connecting to the
component side ground to further reduce noise interference
on sensitive circuit nodes.
ADP2503/ADP2504