101-0392 Rabbit Semiconductor, 101-0392 Datasheet - Page 19

• Manufacturer Part Number: 101-0392
• Description: CARD A/D 0-10V SR9300 SMARTSTAR
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0392

• Accessory Type: Smart Star A/D Card
• For Use With/related Products: SR9300
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

User’s Manual
2.2 Connect the Power Supply
Connect the power supply to the
connector on the backplane—the red (posi-
tive) wire to
wire to
A
backplane to allow an independent power
supply to be used for future development.
For now, use a wire jumper to connect
USER
power supply.
USER
Figure 2. Power Supply Connections
to
GND
connection is supplied on the
+RAW
NOTE: Be careful to hook up
the positive and negative leads
exactly as described. Only the
+5 V circuitry is protected
against reverse polarity.
+RAW
, as shown in Figure 2.
(North America)
so that they share the same
and the black (negative)
POWER IN
The power supply included with the Smart Star
Tool Kit may be used worldwide. Customers
outside North America simply need to
exchange the line cord and plug from the
power supply to their wall outlet with one
available locally.
1. To exchange the line cord and plug, first
2.Unscrew the wires at the ground, L, and N
3.Attach the line cord that you obtained locally
4.Ensure that the wires are attached securely
Figure 3. Power Supply Connections
remove the existing line cord. To access the
screws, use a screwdriver to gently lift up
and remove the plastic insulating cover.
terminals.
to the power supply. Be sure to follow any
color-coding conventions, for example,
green/yellow to ground, brown to L, and
blue to N terminals.
and are not touching each other. Snap on
the plastic insulating cover.
Outside North America
NOTE: The power supply included
Notice to Customers
with the Smart Star Tool Kit is
intended for development purposes
only.
(overseas)
19