DM300004-1 Microchip Technology, DM300004-1 Datasheet - Page 67

• Manufacturer Part Number: DM300004-1
• Description: BOARD DEMO DSPICDEM.NET 1
• Manufacturer: Microchip Technology
• Series: dsPIC™r
• Type: Microcontrollerr

Specifications of DM300004-1

• Contents: *
• Mcu Supported Families: DsPIC30F
• Supported Devices: DsPIC30F6014
• For Use With: PIC30F5013
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: FCC/JATE PSTN, Ethernet NIC
• Lead Free Status / RoHS Status: na, Lead free / RoHS Compliant
• Other names: DM300004-1R; DM300004-1R

5.4
 2004 Microchip Technology Inc.
CONFIGURING YOUR LAPTOP OR DESKTOP PC
5.3.3
Copy the FTP Server folder from the dsPICDEM.net Development Kit Software CD
to the C:\ drive on your PC or laptop (see Figure 5-2).
FIGURE 5-2:
The FTP server demonstration is configured to operate with a Static IP address. To run
the sample program you must configure the local network connections on your laptop
or desktop computer to use a compatible Static IP address.
5.4.1
To reconfigure your network connections, follow these steps:
1. From the Windows desktop, click Start>Settings>Network Connections> Local
2. Right-click Local Area Connection and select Properties. The Local Area
3. On the General tab, scroll down the list of connections to Internet Protocol
4. On the General tab, check Use the following IP address: and type in these
5. Check OK in each dialog box until you close all the windows. Depending on the
6. Proceed with the FTP Server demonstration.
Note: Before you reconfigure your network connection settings for this sample
Area Connection.
Connection Properties dialog displays your current connections.
TCP/IP, then click Properties. The Internet Protocol (TCP/IP) Properties dialog
displays, as shown in Figure 5-3. Make a note of your current settings so you
can restore them later.
settings:
version of Windows you are running, you may be required to reboot your PC for
the changes to take effect.
IP Address:
Subnet mask:
FTP Server Program Setup
Network Connections
program, make a note of your current PC settings. You will want to restore
your original PC settings after you complete the demonstration.
FTP SERVER DEMONSTRATION CODE
FTP Server Demonstration
216
255
. 233
. 255
.
. 255
Copy FTP Server folder from
CD to your C:\ drive
5
.
.
32
0
DS51471A-page 63