DEMO9S08RG60E Freescale Semiconductor, DEMO9S08RG60E Datasheet - Page 8

• Manufacturer Part Number: DEMO9S08RG60E
• Description: BOARD DEMO S08RG/RC/RD/RE FAMILY
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of DEMO9S08RG60E

• Contents: *
• Processor To Be Evaluated: MC9S08RG60
• Data Bus Width: 8 bit
• Interface Type: RS-232
• For Use With/related Products: MC9S08RC, MC9S08RD, MC9S08RE, MC9S08RG
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

D E M O 9 0 8 G B 6 0
2) When power is applied to the Demo board and SW2 is held down, the paced-loop demo
3) When power is applied to the Demo board and SW1 is held down, the serial Debug Monitor
DEBUG MONITOR OPERATION
MEMORY MAP
See the AN2140 application note on the monitor for complete details of operation. Basic
operation is provided in this manual. The monitor occupies 1K bytes of flash memory and
about to 50 bytes of stack space. It provides a binary command set via the SCI1 port.
COMMUNICATION:
The MCU supports a maximum 38.4K bps serial communication rate on the SCI1 interface
port.
POWER ON or RESET PROMPT:
The monitor provides a binary prompt to the Demo board serial SCI1 port.
program executes.
program will execute. CodeWarrior must be running on the host PC to use the monitor
program. Connect a straight through DB-9 serial cable between COM port on the PC and
SCI1 on the Demo board to allow communications.
0x0000 -
0x0045
0x0046 -
0x0845
0x 0846 -
0x17FF
0x1800 -
0x182B
0x182C -
0xFBCB
0xFBCC -
0xFBFF
0xFC00 -
0xFFFF
Table 2: Monitor Memory Map
Freescale Semiconductor, Inc.
For More Information On This Product,
Direct Page Register Space.
See the 9S08RG60 User Manual for details
RAM memory space
Initial Monitor Stack Pointer = 0x107F
Lower flash block – User application memory
9S08RG60 High Page Register block
User Application Flash Memory
User Interrupt Vectors
See AN2140 for details on application
Monitor Flash Memory Space (Protected)
Go to: www.freescale.com
8
0 2 / 0 6 / 0 4