MODEMDK Silicon Laboratories Inc, MODEMDK Datasheet - Page 25

• Manufacturer Part Number: MODEMDK
• Description: KIT DEV EMBEDDED MODEM
• Manufacturer: Silicon Laboratories Inc
• Type: Network Controller & Processorr

Specifications of MODEMDK

• Main Purpose: *
• Embedded: *
• Utilized Ic / Part: C8051F120
• Primary Attributes: *
• Secondary Attributes: *
• Interface Type: RS-232, RJ-11, JTAG
• Product: Modules
• For Use With/related Products: C8051F120
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 336-1285

A
The TCP/IP stack allows the embedded modem to be
configured as a client or server. The embedded modem
can communicate with any other modem through a
standard telephone line (POTS) or telephone simulator.
Any PC running Windows 2000 or Windows XP that has
a modem can be configured to accept calls or dial into
the embedded modem.
Configuring the PC to Accept Calls (Server
Mode)
PPENDIX
1. Go to the “Network Connections” dialog in the
2. Click on “Create New Connection”. The New
3. If using Windows XP, select “Setup an
4. Select “Accept Incoming Connections” and click
5. Place a check mark next to the modem name.
6. Select “Do not allow virtual private connec-
7. Place a check mark next to all user’s who will
8. Select Internet Protocol (TCP/IP) and click
9. Click “Finish” to complete the connection.
Control Panel.
Connection Wizard should appear.
Advanced Connection” and click “Next”.
“Next”.
tions”.
be allowed to use the modem.
“Properties”. From this dialog, you can specify
the IP address configuration and provide or
restrict access to the local area network (LAN).
Providing the embedded modem access to the
LAN allows the embedded system to send e-
mail using the SMTP mail server on a corporate
network.
B—C
ONNECTING THE
E
MBEDDED
Rev. 0.2
Configuring the PC to Dial the Embedded
Modem (Client Mode)
1. Go to the “Network Connections” dialog in the
2. Click on “Create new connection”. The New
3. Select “Connect to the Internet” and click
4. Select “Setup my connection manually” and
5. Select “Connect using a dial-up modem” and
6. Specify a name for the connection and click
7. Specify the phone number of the embedded
8. Select the user’s allowed to dial the connection.
9. Specify the user name and password used to
10. Click “Finish” to complete the connection.
Control Panel.
Connection Wizard should appear.
“Next”.
click “Next”.
click “Next”.
“Next”.
modem.
log into the embedded modem.
M
ODEM TO A
MODEM-DK
PC
25