AC162053 Microchip Technology, AC162053 Datasheet - Page 5

• Manufacturer Part Number: AC162053
• Description: HEADER INTERFACE ICD,ICD2 18DIP
• Manufacturer: Microchip Technology

Specifications of AC162053

• Accessory Type: Transition Header
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: ICD or ICD2 18-DIP
• For Use With: AC164110 - ADAPTER RJ-11 TO ICSP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

© 2005 Microchip Technology Inc.
TABLE 3: S1 SWITCH SETTINGS
64/80-PIN HEADERS
For these headers, there are no jumpers/switches. MPLAB IDE will use its selected
device to choose the correct device to emulate.
Test points are available on this header to check the following: V
ground.
The PICDEM™ HPC Explorer Board is 5V, whereas the ICD device on the header is
3.6V max. Therefore, modification to the demo board is necessary before the header
can be used.
1. Switch S3 should be set to ICE.
2. Jumper J2 must be connected as shown to modify the operating voltage. See
Connect the Header and MPLAB ICD 2
Connect the 9-inch modular interface cable between the MPLAB ICD 2 Module and the
MPLAB ICD 2 Header.
Connect the Header and the Target Board
The header may be connected to the target board as follows:
• PDIP header socket to PDIP target socket with a stand-off (male-to-male
• Header socket to plug on the target board
• Header socket to target socket with a transition socket (see MPLAB
Legend: 1 = Enabled 0 = Disabled * = 1k PFM ** = 2k PFM
This header cannot be plugged directly into the PICDEM™ HPC Explorer Board or
device damage will result.
connector)
2000/4000 Transition Socket Specification, DS51194)
demo board documentation for more information.
PIC16F631
PIC16F677
PIC16F685
PIC16F687
PIC16F689
PIC16F690
Device
ADC
0
1
1
1
1
1
J2
+5V
ADJ
4kPFM
0**
0**
R
0*
CAUTION
1
1
1
VIN
For V = 3.3V:
R = 1.18KΩ (1%)
Header Specification
Switches
USART
0
0
0
1
1
1
SSP
DD
0
1
0
1
1
1
, V
®
DD
DS51292L-page 5
ICE
core and
ECCP
0
0
1
0
0
1