APTH006A0X4-SRZ Lineage Power, APTH006A0X4-SRZ Datasheet - Page 22

• Manufacturer Part Number: APTH006A0X4-SRZ
• Description: DC-DC 0.6-3.63V @ 6A
• Manufacturer: Lineage Power
• Series: Pico TLynx™r
• Type: Point of Load (POL) Non-Isolated with Remote On/Offr

Specifications of APTH006A0X4-SRZ

• Output: 0.6 ~ 3.63V
• Number Of Outputs: 1
• Power (watts): 21W
• Mounting Type: Surface Mount
• Voltage - Input: 2.4 ~ 5.5V
• Package / Case: 10-SMD Module
• 1st Output: 0.6 ~ 3.63 VDC @ 6A
• Size / Dimension: 0.48" L x 0.48" W x 0.29" H (12.2mm x 12.2mm x 7.3mm)
• Power (watts) - Rated: 21W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 93%
• Approvals: CSA, EN, UL, VDE
• Product: Non-Isolated / POL
• Output Power: 22 W
• Input Voltage Range: 2.4 V to 5.5 V
• Output Voltage (channel 1): 0.6 V to 3.63 V
• Output Current (channel 1): 6 A
• Output Type: Non-Isolated
• Output Voltage: 0.6 V to 3.63 V
• Output Current: 6A
• Input Voltage: 2.4 to 5.5V
• Screening Level: Industrial
• Mounting Style: Surface Mount
• Pin Count: 10
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• Lead Free Status / Rohs Status: Details

Data Sheet
April 7, 2011
Surface Mount Information
Pick and Place
The Pico TLynx
construction and are designed for a fully automated
assembly process. The modules are fitted with a
label designed to provide a large surface area for pick
and place operations. The label meets all the
requirements for surface mount processing, as well as
safety standards, and is able to withstand reflow
temperatures of up to 300
product information such as product code, serial
number and the location of manufacture.
Nozzle Recommendations
The module weight has been kept to a minimum by
using open frame construction. Variables such as
nozzle size, tip style, vacuum pressure and placement
speed should be considered to optimize this process.
The minimum recommended inside nozzle diameter
for reliable operation is 3mm. The maximum nozzle
outer diameter, which will safely fit within the
allowable component spacing, is 7 mm.
Bottom Side / First Side Assembly
This module is not recommended for assembly on the
bottom side of a customer board. If such an assembly
is attempted, components may fall off the module
during the second reflow process. If assembly on the
bottom side is planned, please contact Lineage Power
for special manufacturing process instructions.
Lead Free Soldering
The Pico TLynx
and RoHS compliant and fully compatible in a Pb-free
soldering process. Failure to observe the instructions
below may result in the failure of or cause damage to
the modules and can adversely affect long-term
reliability.
Pb-free Reflow Profile
Power Systems will comply with J-STD-020 Rev. C
(Moisture/Reflow Sensitivity Classification for
Nonhermetic Solid State Surface Mount Devices) for
both Pb-free solder profiles and MSL classification
procedures. This standard provides a recommended
forced-air-convection reflow profile based on the
volume and thickness of the package (table 4-2). The
suggested Pb-free solder paste is Sn/Ag/Cu (SAC). A
6 mil thick stencil is recommended. For questions
regarding Land grid array(LGA) soldering, solder
volume; please contact Lineage Power for special
manufacturing process instructions.
LINEAGE
POWER
TM
TM
6A modules use an open frame
6A modules are lead-free (Pb-free)
o
C. The label also carries
2.4 – 5.5Vdc input; 0.6Vdc to 3.63Vdc output; 6A output current
Pico TLynx
TM
The recommended linear reflow profile using
Sn/Ag/Cu solder is shown in Fig. 47. Soldering
outside of the recommended profile requires testing to
verify results and performance.
MSL Rating
The Pico TLynx
2.
Storage and Handling
The recommended storage environment and handling
procedures for moisture-sensitive surface mount
packages is detailed in J-STD-033 Rev. A (Handling,
Packing, Shipping and Use of Moisture/Reflow
Sensitive Surface Mount Devices). Moisture barrier
bags (MBB) with desiccant are required for MSL
ratings of 2 or greater. These sealed packages
should not be broken until time of use. Once the
original package is broken, the floor life of the product
at conditions of ≤ 30°C and 60% relative humidity
varies according to the MSL rating (see J-STD-033A).
The shelf life for dry packed SMT packages will be a
minimum of 12 months from the bag seal date, when
stored at the following conditions: < 40° C, < 90%
relative humidity.
Figure 47. Recommended linear reflow profile
using Sn/Ag/Cu solder.
Post Solder Cleaning and Drying
Considerations
Post solder cleaning is usually the final circuit-board
assembly process prior to electrical board testing. The
result of inadequate cleaning and drying can affect
both the reliability of a power module and the
testability of the finished circuit-board assembly. For
guidance on appropriate soldering, cleaning and
drying procedures, refer to Board Mounted Power
Modules: Soldering and Cleaning Application Note
(AN04-001).
6A: Non-isolated DC-DC Power Modules
300
250
200
150
100
50
0
Per J-STD-020 Rev. C
Heating Zone
1°C/Second
TM
6A modules have a MSL rating of
Peak Temp 260°C
Reflow Time (Seconds)
* Min. Time Above 235°C
*Time Above 217°C
15 Seconds
60 Seconds
Cooling
Zone
22