AXA003A0X-SRZ Lineage Power, AXA003A0X-SRZ Datasheet - Page 14

• Manufacturer Part Number: AXA003A0X-SRZ
• Description: CONVERT DC/DC 0.75 5.5V @ 3A SMD
• Manufacturer: Lineage Power
• Series: Austin MiniLynx™r
• Type: Point of Load (POL) Non-Isolated with Remote On/Offr

Specifications of AXA003A0X-SRZ

• Output: 0.75 ~ 5.5V
• Number Of Outputs: 1
• Power (watts): 16W
• Mounting Type: Surface Mount
• Voltage - Input: 8.3 ~ 14V
• Package / Case: 5-SMD Module
• 1st Output: 0.75 ~ 5.5 VDC @ 3A
• Size / Dimension: 0.80" L x 0.45" W x 0.29" H (20.3mm x 11.4mm x 7.3mm)
• Power (watts) - Rated: 16.5W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 91%
• Approvals: CSA, EN, UL, VDE
• Output Power: 17 W
• Input Voltage Range: 8.3 V to 14 V
• Output Voltage (channel 1): 0.75 V to 5.5 V
• Output Current (channel 1): 3 A
• Package / Case Size: SMD
• Output Type: Non-Isolated
• Output Voltage: 0.75 V to 5.5 V
• Product: Non-Isolated / POL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 555-1049-2; CC109101276

Data Sheet
October 2, 2009
Thermal Considerations
Power modules operate in a variety of thermal
environments; however, sufficient cooling should be
provided to help ensure reliable operation.
Considerations include ambient temperature, airflow,
module power dissipation, and the need for increased
reliability. A reduction in the operating temperature of
the module will result in an increase in reliability. The
thermal data presented here is based on physical
measurements taken in a wind tunnel. The test set-
up is shown in Figure 32. Note that the airflow is
parallel to the long axis of the module as shown in
figure 31. The derating data applies to airflow in
either direction of the module’s long axis.
Figure 31. T ref Temperature measurement
location.
The thermal reference point, T
specifications is shown in Figure 32. For reliable
operation this temperature should not exceed 115
The output power of the module should not exceed
the rated power of the module (Vo,set x Io,max).
Please refer to the Application Note “Thermal
Characterization Process For Open-Frame Board-
Mounted Power Modules” for a detailed discussion of
thermal aspects including maximum device
temperatures.
LINEAGE
POWER
Air Flow
T
ref
ref
used in the
8.3 – 14Vdc input; 0.75Vdc to 5.5Vdc Output; 3A output current
Austin MiniLynx
o
C.
Heat Transfer via Convection
Increased airflow over the module enhances the heat
transfer via convection. Thermal derating curves
showing the maximum output current that can be
delivered by various module versus local ambient
temperature (T
0.5m/s (100 ft./min) are shown in the Characteristics
Curves section.
TM
Wind T unnel
12V SMT Non-isolated Power Modules:
PWBs
Figure 32. Thermal Test Set-up.
A
) for natural convection and up to
flow
Air
(0.235)
x
5.97_
(3.0)
76.2_
25.4_
(1.0)
Probe Loc ation
for measuring
airflow and
ambient
temperature
Power Module
14