CC6-2403SF-E TDK Corporation, CC6-2403SF-E Datasheet - Page 3

• Manufacturer Part Number: CC6-2403SF-E
• Description: CONV DC/DC 6W SNGL 24V 3.3V PCB
• Manufacturer: TDK Corporation
• Series: CC-Er
• Type: Isolatedr

Specifications of CC6-2403SF-E

• Output: 3.3V
• Number Of Outputs: 1
• Power (watts): 6W
• Mounting Type: Through Hole
• Voltage - Input: 18 ~ 36V
• Package / Case: 7-DIP Module
• 1st Output: 3.3 VDC @ 1.2A
• Size / Dimension: 1.40" L x 0.89" W x 0.33" H (35.6mm x 22.6mm x 8.5mm)
• Power (watts) - Rated: 6W
• Operating Temperature: -40°C ~ 85°C
• Approvals: CE, CSA, EN, UL
• Brand/series: CC-E Series
• Configuration: Open-Frame
• Power, Output: 6 W
• Primary Type: DC-DC Converter
• Special Features: Remote On/Off
• Voltage, Input: 24 VDC
• Voltage, Output: 3.3 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 445-2490; CC62403SFE

TDK CORPORATION
Storage
Environment & Conditions of Use
Store the converter unit in the manner specified in the purchase specifications or catalog.
Do not store the converter unit in a corrosive gas or corrosive dust environment.
Do not store the converter unit in a strong electrical or magnetic field. It will cause damage.
Do not operate the converter unit in a corrosive gas or corrosive dust environment.
Operate the converter unit in the environment and under the conditions specified in the purchase
specifications or catalog.
Operate the input and output voltage, output current, etc.
This converter has no built-in over voltage protection.
A continuous over current condition may damage the converter.
This DC to DC converter has a built-in input fuse,
Be sure to insulate the metal case bottom from surrounding components and trace pattern.
Do not operate the converter unit in a strong electrical or magnetic field.
If there is the possibility of surge voltages occurring, take surge voltage prevention
countermeasures.
The metal case of this DC to DC converter is insulated from internal components.
Do not change or modify the product ,
Do not remove or disassemble the case.
The converter unit is not designed to be resistant to radiation.
Give due design consideration for safeguarding against personal injury, fire and other accidents.
The converter unit must be wired according to the measurement circuits
These converters may be connected in series, to ensure reliable operation,
Consult us when using this product in vehicles or
within the rated electrical specifications.
over current of any kind will cause the input to open.
However, if high voltage parts contact the metal case, it may damage the internal components.
TDK will not be responsible for any damage due to modification.
Do not use it in nuclear power controls, medical equipment, etc.
given in the purchase specifications or catalog.
Consult TDK concerning any other connection schemes in order to avoid possible damage.
These converter units cannot be connected in parallel (Fig.1).
TDK recommends the connection shown in Figure 2.
The output current must not exceed the rated current of the smaller converter unit.
in an environment where vibration is regularly applied.
Please be sure to read these instructions for safe design when using the product.
Improper use may pose the danger of smoke or fire.
No.
PRODUCT SPECIFICATIONS
NAME OF DRAWING
MATERIAL NAME
DC-DC CONVERTER UNIT CC6-xxxxxF-E Series
PRODUCT NAME or MODEL,TITLE
QU
MATERIAL
DRAWING No.
TRSA-0286-3
REMARKS
2
PAGE
/
17