NHD-C24064WO-ATFH#-3V3 Newhaven Display, NHD-C24064WO-ATFH#-3V3 Datasheet - Page 10

• Manufacturer Part Number: NHD-C24064WO-ATFH#-3V3
• Description: LCD COG GRAPH 240X64 WH TRANSFL
• Manufacturer: Newhaven Display

Specifications of NHD-C24064WO-ATFH#-3V3

• Display Type: FSTN - Film Super-Twisted Nematic
• Display Mode: Transflective
• Viewing Area: 130.20mm L x 37.60mm W
• Backlight: LED - White
• Dot Size: 0.50mm W x 0.50mm H
• Dot Pitch: 0.03mm x 0.03mm
• Dot Pixels: 240 x 64
• Interface: Parallel/Serial
• Pixel Density: 240 x 64
• Fluid Type: FSTN Positive
• Module Size (w X H X T): 142.5 mm x 51.7 mm x 14.9 mm
• Backlighting: LED White
• Operating Temperature Range: - 20 C to + 70 C
• Product: Graphic LCD Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

void data_slave(unsigned int d)
{
CS_Slave = reset;
AO = set; //Data High
delay(1);
WRT = reset;
P1 = d;
delay(1);
WRT = set;
CS_Slave = set;
}
/**************************************************************************************/
Quality Information
High Temperature storage
Low Temperature storage
High Temperature
Operation
Low Temperature
Operation
High Temperature /
Humidity Operation
Thermal Shock resistance
Vibration test
Static electricity test
Note 1: No condensation to be observed.
Note 2: Conducted after 4 hours of storage at 25
Note 3:
Precautions for using LCDs/LCMs
See Precautions at www.newhavendisplay.com/specs/precautions.pdf
Warranty Information and Terms & Conditions
http://www.newhavendisplay.com/index.php?main_page=terms
Test Item
Test performed on product itself, not inside a container.
storage temperature for a long time.
Endurance test applying the low storage
temperature for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the low thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
with high humidity stress for a long time.
Endurance test applying the electric stress
(voltage & current) during a cycle of low
and high thermal stress.
Endurance test applying vibration to
simulate transportation and use.
Endurance test applying electric static
discharge.
Endurance test applying the high
Content of Test
⁰C, 0%RH.
[10]
+80⁰C , 48hrs
‐30⁰C , 48hrs
+70⁰C 48hrs
‐20⁰C , 48hrs
+40⁰C , 90% RH , 48hrs
‐0⁰C,30min ‐> 25⁰C,5min ‐>
50⁰C,30min = 1 cycle
10 cycles
10‐55Hz , 15mm amplitude.
60 sec in each of 3 directions
X,Y,Z
For 15 minutes
VS=800V, RS=1.5kΩ, CS=100pF
One time
Test Condition
Note
2
1,2
2
1,2
1,2
3