CBC3150-D9C Cymbet Corporation, CBC3150-D9C Datasheet - Page 10

• Manufacturer Part Number: CBC3150-D9C
• Description: IC BATT SOLID ST ENERCHIP 20DFN
• Manufacturer: Cymbet Corporation
• Series: EnerChip™ CCr
• Type: Thin Filmr

Specifications of CBC3150-D9C

• Voltage - Output: 3.3V
• Capacity: 50µAh
• Operating Temperature: -20°C ~ 70°C
• Package / Case: 20-DFN
• Battery Cell Size: 9 mm x 9 mm
• Output Voltage: 3.3 V
• Chemistry: Lithium
• Battery Capacity: 50 uAh
• Battery Size: 9 mm x 9 mm
• Termination Style: Solder
• For Use With: 859-1003 - INDUCTIVE CHARGING EVAL KIT859-1001 - ENERCHIP CC EVAL KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 859-1007-5

Mode 1 Operation
For use in 3.3 volt systems. The V
switchover threshold at approximately 3.0 volts.
Mode 2 Operation
Figure 7 shows the circuitry for user-selectable switchover threshold to a value between 2.5 and 5.0 volts. Use
Figure 8 to determine the value of R1. To determine the amount of hysteresis from the EnerChip switchover
threshold, use Figure 9.
DS-72-03 Rev B
©2009-2010 Cymbet Corporation • Tel: [phone] • www.cymbet.com
Figure 6: CBC3150 Typical Circuit for Mode 1 Operation
Figure 7: CBC3150 Typical Circuit for Mode 2 Operation
MODE
pin should be tied directly to GND, as shown in Figure 6. This will set the
EnerChip CC CBC3150
Page 10 of 15