24LC01BH-I/P Microchip Technology, 24LC01BH-I/P Datasheet - Page 7

• Manufacturer Part Number: 24LC01BH-I/P
• Description: IC EEPROM 1KBIT 400KHZ 8DIP
• Manufacturer: Microchip Technology

Specifications of 24LC01BH-I/P

• Memory Size: 1K (128 x 8)
• Package / Case: 8-DIP (0.300", 7.62mm)
• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Speed: 400kHz
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 2.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Organization: 128 K x 8
• Interface Type: 2-Wire
• Maximum Clock Frequency: 0.1 MHz
• Access Time: 3500 ns
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.5 V
• Maximum Operating Current: 3 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3.3 V, 5 V
• Memory Configuration: 128 X 8
• Clock Frequency: 400kHz
• Supply Voltage Range: 2.5V To 5.5V
• Memory Case Style: DIP
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

4.6
A control byte is the first byte received following the
Start condition from the master device. The control byte
consists of a four-bit control code. For the 24XX01H,
this is set as ‘
tions. The next three bits of the control byte are “don’t
cares” for the 24XX01H.
The last bit of the control byte defines the operation to
be performed. When set to ‘
selected. When set to ‘
Following the Start condition, the 24XX01H monitors
the SDA bus, checking the device type identifier being
transmitted. Upon receiving a ‘
device outputs an Acknowledge signal on the SDA line.
Depending on the state of the R/W bit, the 24XX01H
will select a read or write operation.
© 2008 Microchip Technology Inc.
Operation
Read
Write
Device Addressing
1010
Control
Code
1010
1010
’ binary for read and write opera-
0
’, a write operation is selected.
Block Address
Block Address
Block Select
1
1010
’, a read operation is
’ code, the slave
R/W
1
0
FIGURE 4-2:
24AA01H/24LC01BH
Start Bit
x = “don’t care”
S
1
Control Code
0
Slave Address
1
CONTROL BYTE
ALLOCATION
0
x
Select
Block
Bits
x
Acknowledge Bit
Read/Write Bit
x
DS22104A-page 7
R/W ACK