TS9008DCX RF Taiwan Semiconductor, TS9008DCX RF Datasheet - Page 4

• Manufacturer Part Number: TS9008DCX RF
• Description: Low Dropout Controllers - LDO 0.3A LDO 1.8v Vltage Regulator
• Manufacturer: Taiwan Semiconductor

Specifications of TS9008DCX RF

• Rohs: yes

TS9008
300mA High PSRR Low Noise CMOS LDO
PCB Layout
An input capacitance 1µF is required between the TS9008 input pin and ground (the amount of the capacitance
may be increased without limit), this capacitor must be located a distance of not more than 1cm from the input and
return to a clean analog ground. Input capacitor can filter out the input voltage spike caused by the surge current
due to the inductive effect of the package pin and the printed circuit board’s routing wire. Otherwise, the actual
voltage at the VIN pin may exceed the absolute maximum rating. The output capacitor also must be located a
distance of not more than 1cm from output to a clean analog ground. Because it can filter out the output spike
caused by the surge current due to the inductive effect of the package pin and the printed circuit board’s routing
wire.
4/9
Version: D12