STM32F103ZFH6TR STMicroelectronics, STM32F103ZFH6TR Datasheet - Page 24

• Manufacturer Part Number: STM32F103ZFH6TR
• Description: ARM Microcontrollers - MCU STM32F103 Perf Line M3 768kB 72 MHz MCU
• Manufacturer: STMicroelectronics

Specifications of STM32F103ZFH6TR

• Product Category: ARM Microcontrollers - MCU
• Core: ARM Cortex M3
• Data Bus Width: 32 bit

Description
2.3.29
2.3.30
2.3.31
24/120
Temperature sensor
The temperature sensor has to generate a voltage that varies linearly with temperature. The
conversion range is between 2 V < V
connected to the ADC1_IN16 input channel which is used to convert the sensor output
voltage into a digital value.
Serial wire JTAG debug port (SWJ-DP)
The ARM SWJ-DP Interface is embedded, and is a combined JTAG and serial wire debug
port that enables either a serial wire debug or a JTAG probe to be connected to the target.
The JTAG TMS and TCK pins are shared respectively with SWDIO and SWCLK and a
specific sequence on the TMS pin is used to switch between JTAG-DP and SW-DP.
Embedded Trace Macrocell™
The ARM
data flow inside the CPU core by streaming compressed data at a very high rate from the
STM32F10xxx through a small number of ETM pins to an external hardware trace port
analyzer (TPA) device. The TPA is connected to a host computer using USB, Ethernet, or
any other high-speed channel. Real-time instruction and data flow activity can be recorded
and then formatted for display on the host computer running debugger software. TPA
hardware is commercially available from common development tool vendors. It operates
with third party debugger software tools.
®
Embedded Trace Macrocell provides a greater visibility of the instruction and
Doc ID 16554 Rev 3
DDA
< 3.6 V. The temperature sensor is internally
STM32F103xF, STM32F103xG