ENW89820A1KF Panasonic Electronic Components, ENW89820A1KF Datasheet - Page 22

• Manufacturer Part Number: ENW89820A1KF
• Description: Bluetooth / 802.15.1 Modules BLE PAN1720 CC2540 2.4GHz HCI Mod Ant
• Manufacturer: Panasonic Electronic Components

Specifications of ENW89820A1KF

• Rohs: yes
• Frequency Band: 2.4 GHz
• Operating Supply Voltage: 2 V to 3.6 V
• Output Power: 3 dBm
• Interface Type: SPI, UART, USB
• Antenna Connector Type: Chip
• Maximum Operating Temperature: + 85 C
• Dimensions: 15.6 mm x 8.7 mm
• Minimum Operating Temperature: - 40 C
• Modulation Technique: MSK

CLASSIFICATION
SUBJECT
CUSTOMER’S CODE
PAN172x / PAN171x
24.4. STORAGE NOTES
24.5. SAFETY CAUTIONS
24.6. OTHER CAUTIONS
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
These specifications are intended to preserve the quality assurance of products and
individual components.
Before use, check and evaluate the operation when mounted on your products. Abide by
these specifications, without deviation when using the products. These products may short-
circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are anticipated
when a short circuit occurs, then provide the following failsafe functions, as a minimum.
(1)
(2)
(3)
(4)
(5)
(1)
(2)
(1)
(2)
(3)
(4)
(5)
The module should not be stressed mechanically during storage.
Do not store these products in the following conditions or the performance
characteristics of the product, such as RF performance will be adversely affected:
Keep this product away from water, poisonous gas and corrosive gas.
This product should not be stressed or shocked when transported.
Follow the specification when stacking packed crates (max. 10).
Ensure the safety of the whole system by installing a protection circuit and a
protection device.
Ensure the safety of the whole system by installing a redundant circuit or another
system to prevent a single fault causing an unsafe status.
This specification sheet is copyrighted. Please do not disclose it to a third party.
Please do not use the products for other purposes than those listed.
Be sure to provide an appropriate fail-safe function on your product to prevent an
additional damage that may be caused by the abnormal function or the failure of
the product.
This product has been manufactured without any ozone chemical controlled under
the Montreal Protocol.
These products are not intended for other uses, other than under the special
conditions shown below. Before using these products under such special
conditions, check their performance and reliability under the said special conditions
carefully to determine whether or not they can be used in such a manner.
• Storage in salty air or in an environment with a high concentration of corrosive gas,
• Storage in direct sunlight
• Storage in an environment where the temperature may be outside the range of 5°C
• Storage of the products for more than one year after the date of delivery Storage
• In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places
• In direct sunlight, outdoors, or in a dusty environment
• In an environment where condensation occurs.
• In an environment with a high concentration of harmful gas (e.g. salty air, HCl,
such as Cl2, H2S, NH3, SO2, or NOX
to 35°C range, or where the humidity may be outside the 45 to 85% range.
period: Please check the adhesive strength of the embossed tape and soldering
after 6 months of storage.
where liquid may splash.
CLASS 2 BLUETOOTH LOW ENERGY
SINGLE MODE MODULE
PRODUCT SPECIFICATION
PANASONIC’S CODE
ENW89820AxKF / ENW89835AxKF
No.
DS-17xx-2400-102
PAGE
DATE
www.pideu.panasonic.de
28.01.2013
22 of 35
REV.
1.7