2814S Pro Elec, 2814S Datasheet - Page 2

• Manufacturer Part Number: 2814S
• Description: EXTENSION LEAD, 4 GANG, INDIV-SW, 2M; Cable Assembly Type: Mains; Connector Type A: UK Mains Plug; Connector Type B: ...
• Manufacturer: Pro Elec

Safety Specifications
Construction
Part Number Table
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet
should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting
from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Pro-Elec is the registered trademark of the Group. © Premier Farnell plc 2009.
Make and break test of
switch
Drop test
Live parts accessibility
Extension Leads
Item
Extension Lead, 4 Gang, NDIV-SW, 2M
Extension Lead, 6 Gang, NDIV-SW, 2M
Extension Lead, 8 Gang, NDIV-SW, 2M
10
11
12
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
1
2
3
4
5
6
7
8
9
Item
Neon lamp with 220kΩ resistor
Socket base and cover
Conductors (bus bar)
Description
Surge component
Neon lamp cover
Switch Rocker
Cover Screw
Description
Shutter
Switch
Spring
Cable
Plug
13A, 250V, 15,000 times
Fit with 3G1.25mm
height of 0.4m above the floor
Subjected to 1.0mm test probe with applied force
of 5N when they are mounted and wired as in
normal use
Metal oxide varistor + thermal fuse + neon indicator (if applicable)
Conditions
2
cable, 2.25m and drop at a
Part Number
2814S
2816SP
2818SP
Page <2>
Nylon house with brass terminals
PVC, BS6500 3 x 1.25mm
Mild steel nickel plated
Polycarbonate (PC)
Polycarbonate (PC)
13A BS 1363 plug
Orange light
Nylon (PA)
Mild steel
Material
FRPP
Brass
Voltage drop across each switched pole shall not
exceed 75mV
No external damage which might affect safety and
no components shall have become detached
Live parts of socket shall not be accessible
2
Requirements
07/07/09 V1.0