S7170-0909 HAMAMATSU [Hamamatsu Corporation], S7170-0909 Datasheet - Page 9

• Manufacturer Part Number: S7170-0909
• Manufacturer: HAMAMATSU [Hamamatsu Corporation]

HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: [phone], Fax: [phone], www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: [phone], Fax: [phone]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: [phone], Fax: [phone]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: [phone], Fax: [phone]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: [phone], Fax: [phone]
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: [phone], Fax: [phone]
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: [phone], Fax: [phone]
It is not always necessary to provide all the electrostatic measures stated above. Implement these measures according to the
amount of damage that occurs.
Element cooling/heating temperature incline rate should be set at less than 5 K/min.
Handle these sensors with bare hands or wearing cotton gloves. In addition, wear anti-static clothing or use a wrist band with
Avoid directly placing these sensors on a work-desk or work-bench that may carry an electrostatic charge.
Precaution for use (Electrostatic countermeasures)
Provide ground lines or ground connection with the work-floor, work-desk and work-bench to allow static electricity to
Ground the tools used to handle these sensors, such as tweezers and soldering irons.
Element cooling/heating temperature incline rate
an earth ring, in order to prevent electrostatic damage due to electrical charges from friction.
discharge.
100 k
10 k
1 M
220
240
TEMPERATURE (K)
CCD area image sensor
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K.
260
(Typ. Ta=25 ˚C)
280
300
KMPDB0111EA
S7170-0909, S7171-0909
Cat. No. KMPD1028E06
Feb. 2006 DN
9