SP000219534 INFINEON [Infineon Technologies AG], SP000219534 Datasheet - Page 14

• Manufacturer Part Number: SP000219534
• Description: Smart High-Side Power Switch For Industrial Applications Four Channels: 4 x 140m?
• Manufacturer: INFINEON [Infineon Technologies AG]

Package and Ordering Code
Standard: PG-DSO-20-15
All dimensions in millimetres
Definition of soldering point with temperature T
upper side of solder edge of device pin 15.
Printed circuit board (FR4, 1.5mm thick, one layer
70 m, 6cm
max. power dissipation P
I
Infineon Technologies AG
L(NOM)
Ordering Code
Sales Code
and thermal resistance R
2
active heatsink area) as a reference for
Pin 15
tot
, nominal load current
thja
SP000219534
ITS 716G
s
:
14 of 14
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2006
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and
shall not be considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited
to warranties of non-infringement, regarding circuits, descriptions
and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions
and prices please contact your nearest Infineon Technologies Office
in Germany or our Infineon Technologies Representatives worldwide
(see address list).
Warnings
Due to technical requirements components may contain dangerous
substances. For information on the types in question please contact
your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support
devices or systems with the express written approval of Infineon
Technologies, if a failure of such components can reasonably be
expected to cause the failure of that life-support device or system, or
to affect the safety or effectiveness of that device or system. Life
support devices or systems are intended to be implanted in the
human body, or to support and/or maintain and sustain and/or
protect human life. If they fail, it is reasonable to assume that the
health of the user or other persons may be endangered.
PROFET ® ITS 716G
2006-Mar-23