CX28332 Conexant Systems, CX28332 Datasheet - Page 44

• Manufacturer Part Number: CX28332
• Description: (CX28331 - CX28333) Single/Dual/Triple E3/DS3/STS-1 Line Interface Unit
• Manufacturer: Conexant Systems

2.0 Functional Description
2.3 Receiver
2.3.7 Data Squelching
2-12
are sent out over RPOS (RNRZ) and RNEG (RLCV) pins. These outputs are then
decoded by the Framer or other downstream device. Line code violations are not
detected in this mode of operation. The decoder is configurable for either:
(see
A counter in the receiver keeps track of the number of consecutive symbol
periods without a valid data pulse. When 128 or more 0s in a row are counted, the
receiver assumes that it has lost the signal and resets itself to try and regain the
signal. While the receiver is reacquiring the signal, the clock recovery block locks
to the reference clock and the data squelching is achieved by forcing the data bits
to zero. The data squelching is true in both NRZ and dual rail mode. When the
input signal has been properly amplified and equalized, the clock recovery PLL
will then switch to the incoming data.
When ENDECDIS = 1, the decoder is disabled, and the retimed slicer outputs
• E3 mode using HDB3 coding (E3MODE = 1)
• DS3/STS-1 mode using B3ZS coding (E3MODE = 0)
The receiver digital data outputs are centered on the rising edge of RCLK
Section
2.9).
Conexant
Single/Dual/Triple E3/DS3/STS-1 Line Interface Unit
CX28331/CX28332/CX28333
100985A