AT88SC1616C-SH ATMEL [ATMEL Corporation], AT88SC1616C-SH Datasheet - Page 14

• Manufacturer Part Number: AT88SC1616C-SH
• Description: Atmel CryptoMemory, 16Kbit
• Manufacturer: ATMEL [ATMEL Corporation]

12.2
12.3
12.4
12.5
12.6
13.
Checksum
The AT88SC1616C implements a data validity check function in the form of a checksum, which may function in standard,
authentication or encryption modes.
In the standard mode, the checksum is implemented as a Modification Detection Code (MDC), in which the host may read an
MDC from the device in order to verify that the data sent was received correctly.
In the authentication and encryption modes, the checksum becomes more powerful since it provides a bidirectional data
integrity check and data origin authentication capability in the form of a Message Authentication Code (MAC). Only the
host/device that carried out a valid authentication is capable of computing a valid MAC. While operating in the authentication
or encryption modes, the use of a MAC is required. For an ingoing command, if the device calculates a MAC different from the
MAC transmitted by the host, not only is the command abandoned but the mode is also reset. A new authentication and/or
encryption activation will be required to reactivate the MAC.
Encryption
The data exchanged between the device and the host during read, write and verify password commands may be encrypted to
ensure data confidentiality.
The issuer may choose to require encryption for a user zone by settings made in the configuration memory. Any one of four
keys may be selected for use with a user zone. In this case, activation of the encryption mode is required in order to read/write
data in the zone and only encrypted data will be transmitted. Even if not required, the host may elect to activate encryption
provided the proper keys are known.
Supervisor Mode
Enabling this feature allows the holder of one specific password to gain full access to all eight password sets, including the
ability to change passwords.
Modify Forbidden
No write access is allowed in a user zone protected with this feature at any time. The user zone must be written during device
personalization prior to blowing the security fuses.
Program Only
For a user zone protected by this feature, data within the zone may be changed from a “1” to a “0”, but never from a “0” to a
“1”.
Initial Device Programming
To enable the security features of CryptoMemory, the device must first be personalized to set up several registers and load in
the appropriate passwords and keys. This is accomplished through programming the configuration memory of CryptoMemory
using simple write and read commands. To gain access to the configuration memory, the secure code must first be
successfully presented. For the AT88SC1616C device, the secure code is $20 0C E0. After writing and verifying data in the
configuration memory, the security fuses must be blown to lock this information in the device. For additional information on
personalizing CryptoMemory, please see the application notes Programming CryptoMemory for Embedded Applications and
Initializing CryptoMemory for Smart Card Applications (at www.Atmel.com).
Atmel AT88SC1616C [SUMMARY DATASHEET]
2030LS−CRYPTO−12/11
14