PIC12F609-H/MD MICROCHIP [Microchip Technology], PIC12F609-H/MD Datasheet - Page 71

no-image

PIC12F609-H/MD

Manufacturer Part Number
PIC12F609-H/MD
Description
8-Pin, Flash-Based 8-Bit CMOS Microcontrollers
Manufacturer
MICROCHIP [Microchip Technology]
Datasheet
PIC12F609/615/617/12HV609/615
9.6
Operation During Sleep
The comparator, if enabled before entering Sleep
mode, remains active during Sleep. The additional
current consumed by the comparator is shown
separately
in
the
Section 16.0
“Electrical
Specifications”. If the comparator is not used to wake
the device, power consumption can be minimized while
in Sleep mode by turning off the comparator. The
comparator is turned off by clearing the CMON bit of the
CMCON0 register.
A change to the comparator output can wake-up the
device from Sleep. To enable the comparator to wake
the device from Sleep, the CMIE bit of the PIE1 register
and the PEIE bit of the INTCON register must be set.
The instruction following the SLEEP instruction always
executes following a wake from Sleep. If the GIE bit of
the INTCON register is also set, the device will then
execute the Interrupt Service Routine.
9.7
Effects of a Reset
A device Reset forces the CMCON1 register to its
Reset state. This sets the comparator and the voltage
reference to the OFF state.
 2010 Microchip Technology Inc.
DS41302D-page 71

Related parts for PIC12F609-H/MD