SFH325-3/-4 OSRAM [OSRAM GmbH], SFH325-3/-4 Datasheet - Page 7

• Manufacturer Part Number: SFH325-3/-4
• Manufacturer: OSRAM [OSRAM GmbH]

Löthinweise
Soldering Conditions
Bauform
Types
SIDELED
Zusätzliche Informationen über allgemeine Lötbedingungen erhalten Sie auf Anfrage.
For additional information on general soldering conditions please contact us.
Published by OSRAM Opto Semiconductors GmbH & Co. OHG
Wernerwerkstrasse 2, D-93049 Regensburg
© All Rights Reserved.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components
1
to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2
and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2001-09-12
A critical component is a component usedin a life-support device or system whose failure can reasonably be expected
Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain
1
, may only be used in life-support devices or systems
Lötbad-
temperatur
Temperature
of the
Soldering
Bath
–
Tauch-, Schwall- und Schlepplötung
Dip, Wave and Drag Soldering
Maximal
zulässige
Lötzeit
Max. Perm.
Soldering
Time
–
7
Abstand
Lötstelle –
Gehäuse
Distance
between
Solder Joint
and Case
–
2
with the express written approval of OSRAM OS.
Lötzonen-
temperatur
Temperature
of Soldering
Zone
245 C
SFH 325, SFH 325 FA
Reflow Soldering
Reflowlötung
Maximale
Durchlaufzeit
Max. Transit
Time
10 s