hx121wx1-100 AZ Displays, Inc, hx121wx1-100 Datasheet - Page 25

• Manufacturer Part Number: hx121wx1-100
• Description: Tft Lcd Product
• Manufacturer: AZ Displays, Inc

B2005-C001-A (3/3)
12.0 RELIABLITY TEST
13.0 HANDLING & CAUTIONS
SPEC. NUMBER
13.1 Cautions when taking out the module
13.2 Cautions for handling the module
The Reliability test items and its conditions are shown in below.
No
care. Peel a protection sheet off from the LCD panel surface as slowly as possible.
Pick the pouch only, when taking out module from a shipping package.
As the electrostatic discharges may break the LCD module, handle the LCD module with
As the surface of the polarizer is very soft and easily scratched, use a soft dry cloth
Do not pull the interface connector in or out while the LCD module is operating.
Put the module display side down on a flat horizontal plane.
Handle connectors and cables with care.
1
2
3
4
5
6
7
8
9
impulse and pressure to the LCD module should be avoided.
without chemicals for cleaning.
As the LCD panel and back - light element are made from fragile glass (epoxy) material,
High temperature storage test
Low temperature storage test
High temperature & high humidity
operation test
High temperature operation test
Low temperature operation test
Thermal shock
Vibration test
(non-operating)
Shock test
(non-operating)
Electro-static discharge test
(non-operating)
SPEC TITLE
Test Item
HX121WX1-100 Pre-Product Specification
<Table 12. Reliability Test>
TFT LCD PRODUCT
PRODUCT GROUP
Ta = 60 °C, 240 hrs
Ta = -20 °C, 240 hrs
Ta = 50 ℃, 80%RH, 240hrs
Ta = 50 °C, 240 hrs
Ta = 0 °C, 240 hrs
Ta = -20 °C ↔ 60 °C (30 min), 100 cycle
Frequency : 10~500Hz
Gravity/AMP : 1.5G
Period : X,Y,Z 30min
Gravity : 220G
Pulse width : 2ms, half sine wave
Air : 150pF, 330ohm, 15KV
Contact : 150pF, 330ohm, 8KV
±X, ±Y, ±Z Once for each direction
Conditions
REV
P2
2008. 01. 14
ISSUE DATE
25
A4(210 X 297)
PAGE
OF 29